Hello,
My name is Horia Chirculescu, and I am from Romania.
I have a 2509a Cisco router, running Cisco 12.0(1) IOS software.
I have also 2 leased lines (syncronous) using Serial0 and Serial 1. The
serial 1 interface uses a Courier V.Everything (X2). I encountered that
problem:
The sh interface serial 1 shows that:
Serial1 is up, line protocol is down
Afther I do a manual reset to the modem, the link goes up.
I try first the HDLC data link protocol then PPP protocol and it was the
same problem.
Is there any posibility to shutdown the serial interface when line
protocol goes down? Shuld I use the s19 register from the modem, to enable
the inactivity timer over telephone line?
I tried to find an answer searching the database from www.cisco.com, but
it seems that it is very hard to find something in there!
Why public-availlable information is mixed-up with members-only
informations?
I'm asking because I searched the database using the search-engine from
that WEB-page and i received informations from both public (which I can
obtain) and from private area (which I cannot access)...
Thank you.
____ ____ o ~
// // / __ \ // \ // //'''' //\
//_____// / / / / //___ / // // // \
// // / /_/ / // \ // // //____\
// // ____/ // \ // \.... // \
------------------------------------------------------------------------
Comtec Net Romania
----------------------------------------------------
WEB: www.eltop.ro/root IRC: irc.eltop.ro NEWS: news.eltop.ro
----------------------------------------------------
Horia Chirculescu [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
