linux-pwm  

Messages by Date

• 2015/01/30 Re: [PATCH v2] pwm: samsung: Fix output race on disabling Sjoerd Simons
• 2015/01/29 Re: [PATCH v8 0/2] Imagination Technologies PWM support Ezequiel Garcia
• 2015/01/29 [PATCH RESEND] pwm: sti: Maintain a bitmap of configured devices Ajit Pal Singh
• 2015/01/28 make randcofnig failes for latest git in "pwm-atmel-hlcdc.c:(.text+0x10bf8): undefined reference to `____ilog2_NaN'" Tor Relay
• 2015/01/28 [PATCH 09/24] Documentation: DT bindings: add more chip compatible strings for Tegra PWM Paul Walmsley
• 2015/01/27 Re: [PATCH] ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel Philipp Zabel
• 2015/01/27 Found bug in pwm-mxs.c Gaetan Hug
• 2015/01/26 RE: [PATCH] ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel [email protected]
• 2015/01/22 [PATCH v2] pwm: samsung: Fix output race on disabling Sjoerd Simons
• 2015/01/22 Re: [PATCH] ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel Philipp Zabel
• 2015/01/21 randconfig build failed for v3.19-rc5-84-gb97f880 in pwm-atmel-hlcdc.c:undefined reference to `____ilog2_NaN' Toralf Förster
• 2015/01/21 Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt Vladimir Zapolskiy
• 2015/01/21 Re: [PATCH v3 0/5] pwm: support backward compatibility of DTB extending PWM args Vladimir Zapolskiy
• 2015/01/21 Re: [PATCH v8 1/2] pwm: Imagination Technologies PWM DAC driver Vladimir Zapolskiy
• 2015/01/20 [PATCH] ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel Robby Cai
• 2015/01/20 Re: [PATCH] ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel Shawn Guo
• 2015/01/20 Re: [PATCH v8 0/2] Imagination Technologies PWM support Ezequiel Garcia
• 2015/01/20 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Lee Jones
• 2015/01/19 Re: [PATCHv10 0/2] Add Allwinner SoCs PWM support Thierry Reding
• 2015/01/19 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Thierry Reding
• 2015/01/19 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Thierry Reding
• 2015/01/19 Re: [PATCHv10 1/2] pwm: Add Allwinner SoC support Olliver Schinagl
• 2015/01/19 Re: [PATCHv10 1/2] pwm: Add Allwinner SoC support Chen-Yu Tsai
• 2015/01/18 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Lee Jones
• 2015/01/17 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Andrew Lunn
• 2015/01/15 [PATCH] fix platform_no_drv_owner.cocci warnings kbuild test robot
• 2015/01/15 Re: [PATCH RESEND] pwm: samsung: Fix output race on disabling Tomasz Figa
• 2015/01/15 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Linus Walleij
• 2015/01/14 Re: [PATCH 2/7] gpio: mvebu: Fix probe cleanup on error Linus Walleij
• 2015/01/14 Re: [PATCH 1/7] gpio: mvebu: checkpatch fixes Linus Walleij
• 2015/01/13 Re: [PATCH 1/2] drivers: pwm: core: Add pwmchip_add_inversed Scott Branden
• 2015/01/12 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Andrew Lunn
• 2015/01/12 Re: [PATCH v8 1/2] pwm: Imagination Technologies PWM DAC driver One Thousand Gnomes
• 2015/01/12 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Andrew Lunn
• 2015/01/12 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Linus Walleij
• 2015/01/12 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Andrew Lunn
• 2015/01/12 Re: [PATCH 3/7] gpio: mvebu: Add limited PWM support Imre Kaloz
• 2015/01/09 [PATCH 7/7] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan Andrew Lunn
• 2015/01/09 [PATCH 1/7] gpio: mvebu: checkpatch fixes Andrew Lunn
• 2015/01/09 [PATCH 2/7] gpio: mvebu: Fix probe cleanup on error Andrew Lunn
• 2015/01/09 [PATCH 6/7] arm: mvebu: Enable PWM in defconfig Andrew Lunn
• 2015/01/09 [PATCH 5/7] mvebu: xp: Add pwm properties to .dtsi files Andrew Lunn
• 2015/01/09 [PATCH 3/7] gpio: mvebu: Add limited PWM support Andrew Lunn
• 2015/01/09 [PATCH 0/7] Add PWM support to mvebu gpio driver Andrew Lunn
• 2015/01/09 [PATCH 4/7] DT: bindings: Extend mvebu gpio documentation with PWM Andrew Lunn
• 2015/01/09 [PATCH v8 2/2] DT: pwm: Add binding document for IMG PWM DAC Ezequiel Garcia
• 2015/01/09 [PATCH v8 1/2] pwm: Imagination Technologies PWM DAC driver Ezequiel Garcia
• 2015/01/09 [PATCH v8 0/2] Imagination Technologies PWM support Ezequiel Garcia
• 2015/01/08 Re: [PATCH v7 1/4] pwm: Imagination Technologies PWM DAC driver Ezequiel Garcia
• 2015/01/08 Re: [PATCH v7 1/4] pwm: Imagination Technologies PWM DAC driver Vladimir Zapolskiy
• 2015/01/08 Re: [PATCH v7 3/4] pdm: Imagination Technologies PDM DAC driver Ezequiel Garcia
• 2015/01/08 Re: [PATCH v7 3/4] pdm: Imagination Technologies PDM DAC driver One Thousand Gnomes
• 2015/01/07 [PATCH RESEND] pwm: samsung: Fix output race on disabling Sjoerd Simons
• 2015/01/07 [PATCH v5 1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
• 2015/01/07 [PATCH v5 2/2] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
• 2015/01/07 [PATCH v5 0/2] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
• 2015/01/07 [PATCH v7 0/4] Imagination Technologies PWM and PDM DACs support Ezequiel Garcia
• 2015/01/07 [PATCH v7 4/4] DT: pdm: Add binding document for IMG PDM DAC Ezequiel Garcia
• 2015/01/07 [PATCH v7 3/4] pdm: Imagination Technologies PDM DAC driver Ezequiel Garcia
• 2015/01/07 [PATCH v7 2/4] DT: pwm: Add binding document for IMG PWM DAC Ezequiel Garcia
• 2015/01/07 [PATCH v7 1/4] pwm: Imagination Technologies PWM DAC driver Ezequiel Garcia
• 2015/01/06 Re: [PATCH 1/2] drivers: pwm: core: Add pwmchip_add_inversed Jonathan Richardson
• 2015/01/05 [PATCH] pwm: pca9685: Constify struct regmap_config Krzysztof Kozlowski
• 2015/01/04 Re: [PATCH v4 2/3] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2015/01/04 [PATCH 2/2] drivers: pwm: bcm-kona: Dont set polarity in probe Tim Kryger
• 2015/01/04 [PATCH 1/2] drivers: pwm: core: Add pwmchip_add_inversed Tim Kryger
• 2015/01/04 [PATCH 0/2] Allow registration of default inversed polarity PWMs Tim Kryger
• 2015/01/04 Re: [PATCH v4 2/3] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2014/12/30 [PATCH v4 1/3] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
• 2014/12/30 [PATCH v4 2/3] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
• 2014/12/30 [PATCH v4 3/3] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
• 2014/12/30 [PATCH v4 0/3] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
• 2014/12/22 Re: [PATCH v3 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
• 2014/12/20 Re: [PATCH v3 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
• 2014/12/19 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Olliver Schinagl
• 2014/12/19 Re: [PATCH] pwm: atmel-hlcdc: Prevent div by zero Thierry Reding
• 2014/12/19 Re: randconfig build error with next-20141204, in drivers/pwm Thierry Reding
• 2014/12/18 [PATCH] pwm: atmel-hlcdc: Prevent div by zero Boris Brezillon
• 2014/12/18 Re: randconfig build error with next-20141204, in drivers/pwm Boris Brezillon
• 2014/12/18 Re: randconfig build error with next-20141204, in drivers/pwm Thierry Reding
• 2014/12/18 Re: randconfig build error with next-20141204, in drivers/pwm Thierry Reding
• 2014/12/17 [PATCHv10 1/2] pwm: Add Allwinner SoC support Alexandre Belloni
• 2014/12/17 [PATCHv10 2/2] pwm: sunxi: document OF bindings Alexandre Belloni
• 2014/12/17 [PATCHv10 0/2] Add Allwinner SoCs PWM support Alexandre Belloni
• 2014/12/17 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Alexandre Belloni
• 2014/12/17 [PATCH v3 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
• 2014/12/17 [PATCH v3 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
• 2014/12/17 [PATCH] pwm: samsung: Fix output race on disabling Sjoerd Simons
• 2014/12/17 [GIT PULL] pwm: Changes for v3.19-rc1 Thierry Reding
• 2014/12/16 Re: [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
• 2014/12/14 Re: [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
• 2014/12/12 Re: [PATCH v4] clk: Add PWM clock driver Janusz Użycki
• 2014/12/12 [PATCH v4] clk: Add PWM clock driver Philipp Zabel
• 2014/12/12 Re: [PATCH v3] clk: Add PWM clock driver Philipp Zabel
• 2014/12/12 Re: [PATCH v3] clk: Add PWM clock driver Janusz Użycki
• 2014/12/11 Re: [PATCH v3] clk: Add PWM clock driver Janusz Użycki
• 2014/12/11 Re: [PATCH v3] clk: Add PWM clock driver Janusz Użycki
• 2014/12/10 [PATCH v2 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
• 2014/12/10 [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
• 2014/12/10 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
• 2014/12/10 Re: [PATCH v3] clk: Add PWM clock driver Philipp Zabel
• 2014/12/09 Re: [PATCH v3] clk: Add PWM clock driver Janusz Użycki
• 2014/12/09 [PATCH v3] clk: Add PWM clock driver Philipp Zabel
• 2014/12/09 Re: [PATCH v2] clk: Add PWM clock driver Janusz Użycki
• 2014/12/09 Re: [PATCH v2] clk: Add PWM clock driver Philipp Zabel
• 2014/12/08 Re: [PATCH v2] clk: Add PWM clock driver Janusz Użycki
• 2014/12/06 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2014/12/05 Re: [PATCH v6 0/4] Initial support for ImgTec PWM DAC and PDM DAC Ezequiel Garcia
• 2014/12/04 Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Jonathan Richardson
• 2014/12/04 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Jonathan Richardson
• 2014/12/04 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
• 2014/12/04 Re: [PATCH v2] clk: Add PWM clock driver Janusz Użycki
• 2014/12/04 randconfig build error with next-20141204, in drivers/pwm Jim Davis
• 2014/12/04 Re: [PATCH v2] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Boris Brezillon
• 2014/12/04 Re: [PATCH v2] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Thierry Reding
• 2014/12/03 RE: [PATCH] pwm: sti: Maintain a bitmap of configured devices Ajit Pal SINGH
• 2014/12/01 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Tim Kryger
• 2014/12/01 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Arun Ramamurthy
• 2014/12/01 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Arun Ramamurthy
• 2014/12/01 Re: [PATCH v3 0/5] pwm: support backward compatibility of DTB extending PWM args Vladimir Zapolskiy
• 2014/12/01 Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt Vladimir Zapolskiy
• 2014/12/01 RE: [PATCH v2 0/3] pwm: ftm: add Power Management support [email protected]
• 2014/12/01 Re: [PATCH v2 0/3] pwm: ftm: add Power Management support Thierry Reding
• 2014/11/30 RE: [PATCH v2 0/3] pwm: ftm: add Power Management support [email protected]
• 2014/11/28 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2014/11/28 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Tim Kryger
• 2014/11/28 Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Tim Kryger
• 2014/11/28 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Arun Ramamurthy
• 2014/11/28 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2014/11/28 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Arun Ramamurthy
• 2014/11/28 Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Arun Ramamurthy
• 2014/11/28 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Arun Ramamurthy
• 2014/11/28 [PATCH v6 4/4] DT: pdm: Add binding document for IMG PDM DAC Naidu Tellapati
• 2014/11/28 [PATCH v6 3/4] pdm: Imagination Technologies PDM DAC driver Naidu Tellapati
• 2014/11/28 [PATCH v6 2/4] DT: pwm: Add binding document for IMG PWM DAC Naidu Tellapati
• 2014/11/28 [PATCH v6 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/28 [PATCH v6 0/4] Initial support for ImgTec PWM DAC and PDM DAC Naidu Tellapati
• 2014/11/27 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
• 2014/11/27 RE: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/27 Re: Again about leds-pwm and pwm-mxs Sascha Hauer
• 2014/11/26 Again about leds-pwm and pwm-mxs Uwe Kleine-König
• 2014/11/26 [PATCH v5 0/4] Initial support for ImgTec PWM DAC and PDM DAC Naidu Tellapati
• 2014/11/26 [PATCH v5 4/4] DT: pdm: Add binding document for IMG PDM DAC Naidu Tellapati
• 2014/11/26 [PATCH v5 3/4] pdm: Imagination Technologies PDM DAC driver Naidu Tellapati
• 2014/11/26 [PATCH v5 2/4] DT: pwm: Add binding document for IMG PWM DAC Naidu Tellapati
• 2014/11/26 [PATCH v5 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/25 Re: [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Tim Kryger
• 2014/11/25 Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Tim Kryger
• 2014/11/25 Re: [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Tim Kryger
• 2014/11/25 [PATCH v2 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
• 2014/11/25 [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
• 2014/11/25 [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
• 2014/11/25 [PATCH v2 0/4] pwm: kona: Drivers fixes Scott Branden
• 2014/11/25 [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
• 2014/11/24 Re: [PATCH v2] clk: Add PWM clock driver Philipp Zabel
• 2014/11/24 Re: [PATCH v2] clk: Add PWM clock driver Mike Turquette
• 2014/11/24 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver James Hartley
• 2014/11/24 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Andrew Bresticker
• 2014/11/24 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Andrew Bresticker
• 2014/11/24 RE: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/24 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Thierry Reding
• 2014/11/24 RE: [PATCH RESEND v4 2/4] DT: pwm: Add binding document for IMG PWM DAC Naidu Tellapati
• 2014/11/24 RE: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/24 Re: [PATCH RESEND v4 2/4] DT: pwm: Add binding document for IMG PWM DAC Thierry Reding
• 2014/11/24 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Thierry Reding
• 2014/11/21 [PATCH RESEND v4 2/4] DT: pwm: Add binding document for IMG PWM DAC naidu . tellapati
• 2014/11/21 [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver naidu . tellapati
• 2014/11/21 [PATCH RESEND v4 3/4] pdm: Imagination Technologies PDM DAC driver naidu . tellapati
• 2014/11/21 [PATCH RESEND v4 4/4] DT: pdm: Add binding document for IMG PDM DAC naidu . tellapati
• 2014/11/21 [PATCH RESEND v4 0/4] Initial support for ImgTec PWM DAC and PDM DAC naidu . tellapati
• 2014/11/21 Re: [PATCH RESEND v4 1/4] pwm: Imagination Technologies PWM DAC driver Andrew Bresticker
• 2014/11/20 RE: [PATCH v3 1/4] pwm: Imagination Technologies PWM DAC driver Naidu Tellapati
• 2014/11/20 Re: [PATCH v3 1/4] pwm: Imagination Technologies PWM DAC driver Andrew Bresticker
• 2014/11/19 Re: [PATCH v2 1/4] pwm: Imagination Technologies PWM DAC driver Andrew Bresticker
• 2014/11/19 [PATCH v2] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Boris Brezillon
• 2014/11/18 [PATCH 2/5] pwm: push up dynamic printk level on errors in of_pwm_get() Vladimir Zapolskiy
• 2014/11/18 [PATCH 1/5] pwm: process pwm polarity argument in of_pwm_simple_xlate() Vladimir Zapolskiy
• 2014/11/18 [PATCH 4/5] pwm: do not set of_pwm_xlate_with_flags() as a callback Vladimir Zapolskiy
• 2014/11/18 [PATCH 3/5] pwm: set the actual number of pwms arguments defined in board dts Vladimir Zapolskiy
• 2014/11/18 [PATCH 5/5] pwm: remove of_pwm_xlate_with_flags() function Vladimir Zapolskiy
• 2014/11/18 [PATCH v3 0/5] pwm: support backward compatibility of DTB extending PWM args Vladimir Zapolskiy
• 2014/11/18 Re: [PATCH] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Boris Brezillon
• 2014/11/18 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Olliver Schinagl
• 2014/11/18 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Maxime Ripard
• 2014/11/18 Re: [PATCH] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Thierry Reding
• 2014/11/18 Re: [PATCH] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Nicolas Ferre
• 2014/11/18 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Olliver Schinagl
• 2014/11/18 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Maxime Ripard
• 2014/11/18 Re: [PATCHv9 0/2] Add Allwinner SoCs PWM support Olliver Schinagl
• 2014/11/18 [PATCH] pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling Boris Brezillon
• 2014/11/17 Re: [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
• 2014/11/17 Re: [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Thierry Reding
• 2014/11/17 Re: [PATCH 0/4] pwm: kona: Drivers fixes Thierry Reding
• 2014/11/17 Re: [PATCHv9 1/2] pwm: Add Allwinner SoC support Thierry Reding
• 2014/11/17 Re: [PATCH] pwm: samsung: Allow samsung pwm driver to be enabled on Exynos7 Thierry Reding
• 2014/11/17 Re: [PATCH v10 0/2] pwm: add support for atmel-hlcdc-pwm device Thierry Reding
• 2014/11/14 RE: [PATCH v2 2/4] DT: pwm: Add binding document for IMG PWM DAC Naidu Tellapati
• 2014/11/14 Re: [PATCH v2 2/4] DT: pwm: Add binding document for IMG PWM DAC Andrew Bresticker
• 2014/11/14 [PATCH 0/4] pwm: kona: Drivers fixes Scott Branden
• 2014/11/14 [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden

• Earlier messages
• Later messages