Neil Brown wrote:
Add a '--force' to the '--assemble' and it will start the array for
you.
Just an update (happy one) to the problem. This is what I did (from memory):
-Replaced the failed harddrive
-Used FC5 disc 1 to start in rescue mode
-Used fdisk to partition the new hard drive
-# mdadm -A /dev/md0 /dev/hda2 /dev/hdc2 /dev/hdg1
-# mdadm /dev/md0 -a /dev/hde1
-# mdadm -S /dev/md0
-# mdadm -A --force /dev/md0 /dev/hda2 /dev/hdc2 /dev/hde1 /dev/hdg1
I did some tests with 'mdadm -A --force /dev/md0 /dev/hda2 /dev/hdc2
/dev/hde1 /dev/hdg1 --update=summaries/resync' as well but I'm not sure
if that had anything to do with it.
Anyway, I'm up and running.
--
Johnny Ljunggren, Navtek AS
Tlf: 918 50 411, 33 07 10 77
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
