Rev. Jeffrey Paul wrote:
On Tue, Sep 05, 2006 at 11:03:45AM -0400, Steve Cousins wrote:
These are SATA drives and except for the one machine that has a 3Ware
8506 card in it I haven't been able to get SMART programs to do anything
with these drives. How do others deal with this?
I use the tw_cli program to check up on my 3ware stuff.
Hi Jeffrey,
Thanks. I use tw_cli too and I have scripted a check to see if it
degrades but this doesn't help with checking for disk problems before
they happen which SMART should help with. As it happens, smartctl works
with 3Ware SATA drives. It is my other SATA drives that I'm unable to
monitor.
Steve
It took me quite a bit of time to figure that one out. I don't
have any automated monitoring set up, but it'd be simple enough to
script. I check on the array every so often and run a verify every few
months to see if it kicks a disk out (it hasn't yet).
0 [EMAIL PROTECTED]:~# tw_cli
//datavibe> info
Ctl Model Ports Drives Units NotOpt RRate VRate BBU
------------------------------------------------------------------------
c0 8006-2LP 2 2 1 0 2 - -
//datavibe> info c0
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
------------------------------------------------------------------------------
u0 RAID-1 OK - - 232.885 ON - -
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 WD-WMAL718611
p1 OK u0 232.88 GB 488397168 WD-WMAL718619
//datavibe>
-j
--
______________________________________________________________________
Steve Cousins, Ocean Modeling Group Email: [EMAIL PROTECTED]
Marine Sciences, 452 Aubert Hall http://rocky.umeoce.maine.edu
Univ. of Maine, Orono, ME 04469 Phone: (207) 581-4302
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
