On 9/24/06, chapman <[EMAIL PROTECTED]> wrote:
Can I assume the disk is ok, just needs to be re-added to the array?
Not necessarily. You should look for logs indicating _why_ it is marked bad. If you don't know how long it's been broken, you need some monitoring system, like mdadm or logcheck. This is most commonly caused by bad sectors. If you can re-add and resync goes through without complaining, you're probably ok.
I'm assuming I need to first remove sda1 from the raid then re-add it, correct? If so, what are the specific steps?
mdadm /dev/md0 -r /dev/sda1 mdadm /dev/md0 -a /dev/sda1
Can this be done safely on a live server without pulling the system down?
sure.
How will this affect rebooting once completed - if at all?
Should not have any impact. At least if boot setup is ok.
Any gotchas I should look out for?
Things get tricky if the other disk has stealthily become bad. - tuomas - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
