This would be good for 2.6.19 and even 18.2, if it is seens acceptable.
raid0 at least (possibly other) can be made to Oops with a bad partition
table and best fix seem to be to not let out-of-range request get down
to the device.
### Comments for Changeset
Partitions are not limited to live within a device. So
we should range check after partition mapping.
Note that 'maxsector' was being used for two different things. I have
split off the second usage into 'old_sector' so that maxsector can be
still be used for it's primary usage later in the function.
Cc: Jens Axboe <[EMAIL PROTECTED]>
Signed-off-by: Neil Brown <[EMAIL PROTECTED]>
### Diffstat output
./block/ll_rw_blk.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
--- .prev/block/ll_rw_blk.c 2006-10-31 11:43:33.000000000 +1100
+++ ./block/ll_rw_blk.c 2006-10-31 12:47:07.000000000 +1100
@@ -3007,6 +3007,7 @@ static inline void __generic_make_reques
{
request_queue_t *q;
sector_t maxsector;
+ sector_t old_sector;
int ret, nr_sectors = bio_sectors(bio);
dev_t old_dev;
@@ -3035,7 +3036,7 @@ static inline void __generic_make_reques
* NOTE: we don't repeat the blk_size check for each new device.
* Stacking drivers are expected to know what they are doing.
*/
- maxsector = -1;
+ old_sector = -1;
old_dev = 0;
do {
char b[BDEVNAME_SIZE];
@@ -3069,15 +3070,30 @@ end_io:
*/
blk_partition_remap(bio);
- if (maxsector != -1)
+ if (old_sector != -1)
blk_add_trace_remap(q, bio, old_dev, bio->bi_sector,
- maxsector);
+ old_sector);
blk_add_trace_bio(q, bio, BLK_TA_QUEUE);
- maxsector = bio->bi_sector;
+ old_sector = bio->bi_sector;
old_dev = bio->bi_bdev->bd_dev;
+ maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+ if (maxsector) {
+ sector_t sector = bio->bi_sector;
+
+ if (maxsector < nr_sectors || maxsector - nr_sectors <
sector) {
+ /*
+ * This may well happen - partitions are not
checked
+ * to make sure they are within the size of the
+ * whole device.
+ */
+ handle_bad_sector(bio);
+ goto end_io;
+ }
+ }
+
ret = q->make_request_fn(q, bio);
} while (ret);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
