On Thursday January 11, [EMAIL PROTECTED] wrote: > Can someone tell me what this means please? I just received this in > an email from one of my servers: > ....
> > A FailSpare event had been detected on md device /dev/md2. > > It could be related to component device /dev/sde2. It means that mdadm has just noticed that /dev/sde2 is a spare and is faulty. You would normally expect this if the array is rebuilding a spare and a write to the spare fails however... > > md2 : active raid5 sdf2[4] sde2[5](F) sdd2[3] sdc2[2] sdb2[1] sda2[0] > 560732160 blocks level 5, 256k chunk, algorithm 2 [5/5] [UUUUU] That isn't the case here - your array doesn't need rebuilding. Possible a superblock-update failed. Possibly mdadm only just started monitoring the array and the spare has been faulty for some time. > > Does the email message mean drive sde2[5] has failed? I know the sde2 refers > to the second partition of /dev/sde. Here is the partition table It means that md thinks sde2 cannot be trusted. To find out why you would need to look at kernel logs for IO errors. > > I have partition 2 of drive sde as one of the raid devices for md. Does the > (S) > on sde3[2](S) mean the device is a spare for md1 and the same for md0? > Yes, (S) means the device is spare. You don't have (S) next to sde2 on md2 because (F) (failed) overrides (S). You can tell by the position [5], that it isn't part of the array (being a 5 disk array, the active positions are 0,1,2,3,4). NeilBrown - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
