What I've got:
openSUSE 10.2 running 2.6.18.8-0.3-default on x86_64 (3600+, dual core)
with a 3 component raid5:
md0 : active raid5 sdc4[2] sda4[0] sdb4[1]
613409664 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
I was testing sequential writes speeds with dd:
dd if=/dev/zero of=/dev/raid/test bs=192K
with and without oflag=direct, and various bitmap choices.
with varying blocksizes.
What I'm observing I simply can't explain.
1. if I use an external bitmap, and using the page cache (without
oflag=direct), I seem to be able to get up to 116MB/s writes. The I/O
patterns as reported by iostat/dstat are reasonable (0 B/S reads,
high 60's (with some fluxuation, but not much) MB/s writes, very
consistent across all three drives):
--dsk/sda-- --dsk/sdb-- --dsk/sdc-- --dsk/hda--
read writ: read writ: read writ: read writ
0 67M: 16k 71M: 52k 69M: 0 272k
0 67M: 20k 65M: 0 69M: 0 320k
2. now, if I use oflag=direct, the I/O patterns are very strange:
0 (zero) reads from sda or sdb, and 2-3MB/s worth of reads from sdc.
11-12 MB/s writes to sda, and 8-9MB/s writes to sdb and sdc.
--dsk/sda-- --dsk/sdb-- --dsk/sdc-- --dsk/hda--
read writ: read writ: read writ: read writ
0 11M:4096B 8448k:2824k 8448k: 0 132k
0 12M: 0 9024k:3008k 9024k: 0 152k
Why is /dev/sdc getting so many reads? This only happens with
multiples of 192K for blocksizes. For every other blocksize I tried,
the reads are spread across all three disks.
3. Why can't I find a blocksize that doesn't require reading from any
device? Theoretically, if the chunk size is 64KB, then writing 128KB
*should* result in 3 writes and 0 reads, right?
4. When using the page cache (no oflag=direct), even with 192KB
blocksizes, there are (except for noise) *no* reads from the devices,
as expected. Why does bypassing the page cache, plus the
combination of 192KB blocks cause such strange behavior?
5. If I use an 'internal' bitmap, the write performance is *terrible*. I
can't seem to sqeeze more than 8-12MB/s out of it (no page cache) or
60MB/s (page cache allowed). When not using the page cache, the reads
are spread across all three disks to the tune of 2-4MB per second.
The bitmap "file" is only 150KB or so in size, why does storing it
internally cause such a huge performance problem?
--
Jon Nelson <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
