} -----Original Message----- } From: [EMAIL PROTECTED] [mailto:linux-raid- } [EMAIL PROTECTED] On Behalf Of Jon Collette } Sent: Thursday, July 12, 2007 5:29 PM } To: linux-raid@vger.kernel.org } Subject: mdadm create to existing raid5 } } I wasn't thinking and did a mdadm --create to my existing raid5 instead } of --assemble. The syncing process ran and now its not mountable. Is } there anyway to recover from this? } } Thanks } - } To unsubscribe from this list: send the line "unsubscribe linux-raid" in } the body of a message to [EMAIL PROTECTED] } More majordomo info at http://vger.kernel.org/majordomo-info.html
Maybe. Not really sure. But don't do anything until someone that really knows answers! What I think... If you did a create with the exact same parameters the data should not have changed. But you can't mount so you must have used different parameters. Only 1 disk was written to during the create. Only that disk was changed. If you remove the 1 disk and do another create with the original parameters and put "missing" for the 1 disk your array will be back to normal, but degraded. Once you confirm this you can add back the 1 disk. You must be able to determine which disk was written to. I don't know how to do that unless you have the output from "mdadm -D" during the create/syncing. But please don't proceed until someone else confirms what I say or gives better advice! Guy - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
