Hi folks, I am using RAID 5 ( Software MD RAID ) on my RAID controller card ( ata_piix). ( dmesg attached) - However, I am unable to mount my home partition over ext3. I get the errors
EXT2-fs: group descriptors corrupted! EXT2-fs error (device md1): ext2_check_descriptors: Block bitmap for group 128 not in group (block 1630887232)! The output of lsraid is attached too - lsraid reports the devices to be just fine I tried fsck.ext3 -y /dev/md1 to no avail. Let me know if you need any more input Thanks in advance for all the help. Note i am using KUbuntu LTS 6.06, Kernel 2.6.15 Regards Ash
[dev 9, 1] /dev/md1 5D39138F.4F5B7F2F.22B42D61.12EC18EB online [dev 8, 4] /dev/sda4 5D39138F.4F5B7F2F.22B42D61.12EC18EB good [dev 8, 19] /dev/sdb3 5D39138F.4F5B7F2F.22B42D61.12EC18EB good [dev 8, 35] /dev/sdc3 5D39138F.4F5B7F2F.22B42D61.12EC18EB good [dev 8, 51] /dev/sdd3 5D39138F.4F5B7F2F.22B42D61.12EC18EB spare
[17179569.184000] Linux version 2.6.15-26-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007fe76000 (usable) [17179569.184000] BIOS-e820: 000000007fe76000 - 000000007fee9000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007fee9000 - 000000007feed000 (usable) [17179569.184000] BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data) [17179569.184000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) [17179569.184000] 1151MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000fe680 [17179569.184000] On node 0 totalpages: 524032 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294656 pages, LIFO batch:31 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 INTEL ) @ 0x000fe020 [17179569.184000] ACPI: RSDT (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fefde48 [17179569.184000] ACPI: FADT (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fefcf10 [17179569.184000] ACPI: MADT (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fefce10 [17179569.184000] ACPI: WDDT (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fef7f90 [17179569.184000] ACPI: MCFG (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fef7f10 [17179569.184000] ACPI: ASF! (v032 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x7fefcd10 [17179569.184000] ACPI: SSDT (v001 INTEL CpuPm 0x000002a2 MSFT 0x01000013) @ 0x7fefdc10 [17179569.184000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x000002a2 MSFT 0x01000013) @ 0x7fefda10 [17179569.184000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x000002a2 MSFT 0x01000013) @ 0x7fefd810 [17179569.184000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x000002a2 MSFT 0x01000013) @ 0x7fefd610 [17179569.184000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x000002a2 MSFT 0x01000013) @ 0x7fefd410 [17179569.184000] ACPI: DSDT (v001 INTEL 04DT044 0x000002a2 MSFT 0x01000013) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x408 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:6 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [17179569.184000] Processor #1 15:6 APIC version 20 [17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 5, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:80100000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/md0 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 3392.107 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.572000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.572000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.652000] Memory: 2067160k/2096128k available (1976k kernel code, 27132k reserved, 606k data, 288k init, 1178092k highmem) [17179569.652000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.732000] Calibrating delay using timer specific routine.. 6791.06 BogoMIPS (lpj=13582124) [17179569.732000] Security Framework v1.0.0 initialized [17179569.732000] SELinux: Disabled at boot. [17179569.732000] Mount-cache hash table entries: 512 [17179569.732000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 [17179569.732000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 [17179569.732000] monitor/mwait feature present. [17179569.732000] using mwait in idle threads. [17179569.732000] CPU: Trace cache: 12K uops, L1 D cache: 16K [17179569.732000] CPU: L2 cache: 2048K [17179569.732000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000e49d 00000000 00000001 [17179569.732000] mtrr: v2.0 (20020519) [17179569.732000] CPU: Intel(R) Pentium(R) D CPU 3.40GHz stepping 04 [17179569.732000] Enabling fast FPU save and restore... done. [17179569.732000] Enabling unmasked SIMD FPU exception support... done. [17179569.732000] Checking 'hlt' instruction... OK. [17179569.748000] checking if image is initramfs... it is [17179570.196000] Freeing initrd memory: 6614k freed [17179570.200000] ACPI: Looking for DSDT ... not found! [17179570.204000] ENABLING IO-APIC IRQs [17179570.204000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179570.348000] NET: Registered protocol family 16 [17179570.348000] EISA bus registered [17179570.348000] ACPI: bus type pci registered [17179570.348000] PCI: Using MMCONFIG [17179570.348000] ACPI: Subsystem revision 20051216 [17179570.352000] ACPI: Interpreter enabled [17179570.352000] ACPI: Using IOAPIC for interrupt routing [17179570.352000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.352000] PCI: Probing PCI hardware (bus 00) [17179570.352000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179570.352000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179570.352000] Boot video device is 0000:04:04.0 [17179570.352000] PCI: Transparent bridge - 0000:00:1e.0 [17179570.352000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.356000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [17179570.356000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [17179570.356000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [17179570.356000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [17179570.356000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [17179570.356000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [17179570.356000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [17179570.356000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [17179570.360000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) [17179570.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [17179570.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [17179570.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [17179570.360000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.360000] pnp: PnP ACPI init [17179570.364000] pnp: PnP ACPI: found 9 devices [17179570.364000] PnPBIOS: Disabled by ACPI PNP [17179570.364000] PCI: Using ACPI for IRQ routing [17179570.364000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.364000] pnp: 00:05: ioport range 0x500-0x53f has been reserved [17179570.364000] pnp: 00:05: ioport range 0x400-0x47f could not be reserved [17179570.364000] pnp: 00:05: ioport range 0x680-0x6ff has been reserved [17179570.364000] PCI: Bridge: 0000:00:1c.0 [17179570.364000] IO window: disabled. [17179570.364000] MEM window: disabled. [17179570.364000] PREFETCH window: disabled. [17179570.364000] PCI: Bridge: 0000:00:1c.4 [17179570.364000] IO window: disabled. [17179570.364000] MEM window: disabled. [17179570.364000] PREFETCH window: disabled. [17179570.364000] PCI: Bridge: 0000:00:1c.5 [17179570.364000] IO window: 2000-2fff [17179570.364000] MEM window: 88100000-881fffff [17179570.364000] PREFETCH window: disabled. [17179570.364000] PCI: Bridge: 0000:00:1e.0 [17179570.364000] IO window: 1000-1fff [17179570.364000] MEM window: 88000000-880fffff [17179570.364000] PREFETCH window: 80000000-87ffffff [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [17179570.364000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179570.364000] audit: initializing netlink socket (disabled) [17179570.364000] audit(1184589451.364:1): initialized [17179570.364000] highmem bounce pool size: 64 pages [17179570.364000] VFS: Disk quotas dquot_6.5.1 [17179570.364000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.364000] Initializing Cryptographic API [17179570.364000] io scheduler noop registered [17179570.364000] io scheduler anticipatory registered [17179570.364000] io scheduler deadline registered [17179570.364000] io scheduler cfq registered [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179570.364000] assign_interrupt_mode Found MSI capability [17179570.364000] Allocate Port Service[pcie00] [17179570.364000] Allocate Port Service[pcie02] [17179570.364000] Allocate Port Service[pcie03] [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [17179570.364000] assign_interrupt_mode Found MSI capability [17179570.364000] Allocate Port Service[pcie00] [17179570.364000] Allocate Port Service[pcie02] [17179570.364000] Allocate Port Service[pcie03] [17179570.364000] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177 [17179570.364000] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [17179570.364000] assign_interrupt_mode Found MSI capability [17179570.364000] Allocate Port Service[pcie00] [17179570.364000] Allocate Port Service[pcie02] [17179570.364000] Allocate Port Service[pcie03] [17179570.364000] isapnp: Scanning for PnP cards... [17179570.716000] isapnp: No Plug & Play device found [17179570.732000] PNP: No PS/2 controller found. Probing ports directly. [17179570.740000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179570.740000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.740000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179570.740000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.740000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.740000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.740000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.740000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.740000] mice: PS/2 mouse device common for all mice [17179570.740000] EISA: Probing bus 0 at eisa.0 [17179570.740000] Cannot allocate resource for EISA slot 1 [17179570.740000] Cannot allocate resource for EISA slot 2 [17179570.740000] Cannot allocate resource for EISA slot 3 [17179570.740000] EISA: Detected 0 cards. [17179570.740000] NET: Registered protocol family 2 [17179570.780000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179570.780000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [17179570.780000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [17179570.780000] TCP: Hash tables configured (established 262144 bind 65536) [17179570.780000] TCP reno registered [17179570.780000] TCP bic registered [17179570.780000] NET: Registered protocol family 1 [17179570.780000] NET: Registered protocol family 8 [17179570.780000] NET: Registered protocol family 20 [17179570.780000] Using IPI Shortcut mode [17179570.780000] ACPI wakeup devices: [17179570.780000] SLPB P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M AZAL [17179570.780000] ACPI: (supports S0 S1 S4 S5) [17179570.780000] Freeing unused kernel memory: 288k freed [17179570.816000] vga16fb: initializing [17179570.816000] vga16fb: mapped to 0xc00a0000 [17179571.008000] Console: switching to colour frame buffer device 80x25 [17179571.008000] fb0: VGA16 VGA frame buffer device [17179572.192000] Capability LSM initialized [17179572.700000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.700000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217 [17179572.700000] ICH7: chipset revision 1 [17179572.700000] ICH7: not 100% native mode: will probe irqs later [17179572.700000] ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:DMA [17179572.700000] Probing IDE interface ide0... [17179572.988000] hda: ST3320620A, ATA DISK drive [17179573.268000] hdb: ST3320620A, ATA DISK drive [17179573.324000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.328000] hda: max request size: 1024KiB [17179573.372000] hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100) [17179573.396000] hda: cache flushes supported [17179573.396000] hda: hda1 [17179573.420000] hdb: max request size: 1024KiB [17179573.464000] hdb: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100) [17179573.492000] hdb: cache flushes supported [17179573.492000] hdb: hdb1 [17179573.848000] SCSI subsystem initialized [17179573.852000] ACPI: bus type scsi registered [17179573.852000] libata version 1.20 loaded. [17179573.852000] ata_piix 0000:00:1f.2: version 1.05 [17179573.852000] ata_pci_init_one: pci_dev class+intf: 0x1018f [17179573.852000] ata_pci_init_one: NO_LEGACY == 0 [17179573.852000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 [17179573.852000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179573.852000] ata1: PATA max UDMA/133 cmd 0x30C8 ctl 0x30E6 bmdma 0x30A0 irq 225 [17179573.852000] ata2: PATA max UDMA/133 cmd 0x30C0 ctl 0x30E2 bmdma 0x30A8 irq 225 [17179574.016000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 [17179574.016000] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 [17179574.016000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.024000] ata1: dev 1 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 [17179574.024000] ata1: dev 1 ATA-7, max UDMA/133, 312581808 sectors: LBA48 [17179574.024000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.024000] ata1: dev 0 configured for UDMA/133 [17179574.024000] ata1: dev 1 configured for UDMA/133 [17179574.024000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.024000] scsi0 : ata_piix [17179574.188000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 [17179574.188000] ata2: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 [17179574.188000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.196000] ata2: dev 1 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 [17179574.196000] ata2: dev 1 ATA-7, max UDMA/133, 312581808 sectors: LBA48 [17179574.196000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.196000] ata2: dev 0 configured for UDMA/133 [17179574.196000] ata2: dev 1 configured for UDMA/133 [17179574.196000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5400 [17179574.196000] scsi1 : ata_piix [17179574.196000] Vendor: ATA Model: ST3160811AS Rev: 3.AA [17179574.196000] Type: Direct-Access ANSI SCSI revision: 05 [17179574.196000] Vendor: ATA Model: ST3160211AS Rev: 3.AA [17179574.196000] Type: Direct-Access ANSI SCSI revision: 05 [17179574.200000] Vendor: ATA Model: ST3160211AS Rev: 3.AA [17179574.200000] Type: Direct-Access ANSI SCSI revision: 05 [17179574.200000] Vendor: ATA Model: ST3160211AS Rev: 3.AA [17179574.200000] Type: Direct-Access ANSI SCSI revision: 05 [17179574.208000] Driver 'sd' needs updating - please use bus_type methods [17179574.212000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [17179574.212000] SCSI device sda: drive cache: write back [17179574.216000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [17179574.216000] SCSI device sda: drive cache: write back [17179574.216000] sda: sda1 sda2 sda3 sda4 [17179574.232000] sd 0:0:0:0: Attached scsi disk sda [17179574.232000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) [17179574.236000] SCSI device sdb: drive cache: write back [17179574.236000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) [17179574.236000] SCSI device sdb: drive cache: write back [17179574.236000] sdb: sdb1 sdb2 sdb3 [17179574.276000] sd 0:0:1:0: Attached scsi disk sdb [17179574.276000] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) [17179574.276000] SCSI device sdc: drive cache: write back [17179574.280000] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) [17179574.280000] SCSI device sdc: drive cache: write back [17179574.280000] sdc: sdc1 sdc2 sdc3 [17179574.284000] sd 1:0:0:0: Attached scsi disk sdc [17179574.288000] SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) [17179574.288000] SCSI device sdd: drive cache: write back [17179574.292000] SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) [17179574.296000] SCSI device sdd: drive cache: write back [17179574.296000] sdd: sdd1 sdd2 sdd3 [17179574.328000] sd 1:0:1:0: Attached scsi disk sdd [17179574.720000] usbcore: registered new driver usbfs [17179574.720000] usbcore: registered new driver hub [17179574.720000] USB Universal Host Controller Interface driver v2.3 [17179574.720000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233 [17179574.720000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179574.720000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179574.720000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179574.720000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00003080 [17179574.724000] hub 1-0:1.0: USB hub found [17179574.724000] hub 1-0:1.0: 2 ports detected [17179574.828000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 [17179574.828000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179574.828000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179574.828000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179574.828000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00003060 [17179574.828000] hub 2-0:1.0: USB hub found [17179574.828000] hub 2-0:1.0: 2 ports detected [17179574.932000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 [17179574.932000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179574.932000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179574.932000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179574.932000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00003040 [17179574.932000] hub 3-0:1.0: USB hub found [17179574.932000] hub 3-0:1.0: 2 ports detected [17179575.036000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 [17179575.036000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179575.036000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179575.036000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179575.036000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00003020 [17179575.036000] hub 4-0:1.0: USB hub found [17179575.036000] hub 4-0:1.0: 2 ports detected [17179575.068000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [17179575.140000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233 [17179575.140000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179575.140000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179575.140000] ehci_hcd 0000:00:1d.7: debug port 1 [17179575.140000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [17179575.140000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179575.140000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0x88200400 [17179575.144000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179575.144000] hub 5-0:1.0: USB hub found [17179575.144000] hub 5-0:1.0: 8 ports detected [17179575.268000] Probing IDE interface ide1... [17179575.596000] usb 1-2: device not accepting address 2, error -71 [17179575.868000] raid5: automatically using best checksumming function: pIII_sse [17179575.888000] pIII_sse : 5233.000 MB/sec [17179575.888000] raid5: using function: pIII_sse (5233.000 MB/sec) [17179575.888000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179575.888000] md: bitmap version 4.39 [17179575.888000] md: raid5 personality registered as nr 4 [17179576.328000] usb 1-2: new full speed USB device using uhci_hcd and address 4 [17179576.480000] usbcore: registered new driver hiddev [17179576.484000] input: BTC USB Multimedia Cordless Kit as /class/input/input0 [17179576.484000] input: USB HID v1.10 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.0-2 [17179576.496000] input: BTC USB Multimedia Cordless Kit as /class/input/input1 [17179576.496000] input: USB HID v1.10 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.0-2 [17179576.496000] usbcore: registered new driver usbhid [17179576.496000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179576.500000] md: md0 stopped. [17179576.564000] md: bind<sdb2> [17179576.564000] md: bind<sdc2> [17179576.576000] md: bind<sdd2> [17179576.576000] md: bind<sda3> [17179576.576000] raid5: device sda3 operational as raid disk 0 [17179576.576000] raid5: device sdc2 operational as raid disk 2 [17179576.576000] raid5: device sdb2 operational as raid disk 1 [17179576.576000] raid5: allocated 3161kB for md0 [17179576.576000] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2 [17179576.576000] RAID5 conf printout: [17179576.576000] --- rd:3 wd:3 fd:0 [17179576.576000] disk 0, o:1, dev:sda3 [17179576.576000] disk 1, o:1, dev:sdb2 [17179576.576000] disk 2, o:1, dev:sdc2 [17179576.584000] md: md1 stopped. [17179576.708000] md: bind<sdb3> [17179576.716000] md: bind<sdc3> [17179576.728000] md: bind<sdd3> [17179576.736000] md: bind<sda4> [17179576.736000] raid5: device sda4 operational as raid disk 0 [17179576.736000] raid5: device sdc3 operational as raid disk 2 [17179576.736000] raid5: device sdb3 operational as raid disk 1 [17179576.736000] raid5: allocated 3161kB for md1 [17179576.736000] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [17179576.736000] RAID5 conf printout: [17179576.736000] --- rd:3 wd:3 fd:0 [17179576.736000] disk 0, o:1, dev:sda4 [17179576.736000] disk 1, o:1, dev:sdb3 [17179576.736000] disk 2, o:1, dev:sdc3 [17179576.780000] Attempting manual resume [17179576.848000] EXT3-fs: mounted filesystem with ordered data mode. [17179576.864000] kjournald starting. Commit interval 5 seconds [17179584.332000] ts: Compaq touchscreen protocol output [17179584.388000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179584.388000] sd 0:0:1:0: Attached scsi generic sg1 type 0 [17179584.388000] sd 1:0:0:0: Attached scsi generic sg2 type 0 [17179584.388000] sd 1:0:1:0: Attached scsi generic sg3 type 0 [17179585.396000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179585.488000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179585.768000] hw_random: RNG not detected [17179585.892000] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 [17179585.892000] Copyright (c) 1999-2005 Intel Corporation. [17179585.892000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179585.892000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [17179585.948000] e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:8a:81:82 [17179586.008000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [17179586.008000] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179586.012000] Real Time Clock Driver v1.12 [17179586.060000] e1000: 0000:04:05.0: e1000_probe: (PCI:33MHz:32-bit) 00:16:76:8a:81:83 [17179586.092000] input: PC Speaker as /class/input/input2 [17179586.236000] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [17179587.000000] lp: driver loaded but no devices found [17179587.032000] ieee1394: Initialized config rom entry `ip1394' [17179587.032000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> [17179587.032000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179587.032000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179587.088000] fuse init (API version 7.3) [17179587.128000] Adding 875532k swap on /dev/sda2. Priority:-1 extents:1 across:875532k [17179587.140000] Adding 979924k swap on /dev/sdb1. Priority:-2 extents:1 across:979924k [17179587.152000] Adding 979924k swap on /dev/sdc1. Priority:-3 extents:1 across:979924k [17179587.152000] Adding 979924k swap on /dev/sdd1. Priority:-4 extents:1 across:979924k [17179587.364000] EXT3 FS on md0, internal journal [17179587.732000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] [17179587.820000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex [17179587.820000] e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO [17179590.144000] kjournald starting. Commit interval 5 seconds [17179590.144000] EXT3 FS on sda1, internal journal [17179590.144000] EXT3-fs: mounted filesystem with ordered data mode. [17179592.996000] ACPI: Power Button (FF) [PWRF] [17179592.996000] ACPI: Sleep Button (CM) [SLPB] [17179593.064000] ibm_acpi: ec object not found [17179593.088000] pcc_acpi: loading... [17179593.556000] NET: Registered protocol family 10 [17179593.556000] lo: Disabled Privacy Extensions [17179593.556000] IPv6 over IPv4 tunneling driver [17179596.140000] ppdev: user-space parallel port driver [17179596.900000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [17179596.900000] apm: overridden by ACPI. [17179601.972000] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). [17179602.516000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [17179602.516000] NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist [17179602.516000] NFSD: starting 90-second grace period [17179604.344000] eth0: no IPv6 routers present [17179608.876000] NET: Registered protocol family 17 [17179616.772000] Linux agpgart interface v0.101 (c) Dave Jones [17179616.788000] [drm] Initialized drm 1.0.1 20051102 [17179616.788000] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 18 (level, low) -> IRQ 217 [17179616.792000] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [17179619.456000] [drm] Setting GART location based on new memory map [17179619.456000] [drm] writeback test succeeded in 1 usecs [17179675.668000] EXT3-fs error (device md1): ext3_check_descriptors: Block bitmap for group 128 not in group (block 1630887232)! [17179675.672000] EXT3-fs: group descriptors corrupted ! [17180967.644000] EXT3-fs error (device md1): ext3_check_descriptors: Block bitmap for group 128 not in group (block 1630887232)! [17180967.648000] EXT3-fs: group descriptors corrupted ! [17181559.260000] EXT2-fs error (device md1): ext2_check_descriptors: Block bitmap for group 128 not in group (block 1630887232)! [17181559.260000] EXT2-fs: group descriptors corrupted! [17181637.320000] EXT2-fs error (device md1): ext2_check_descriptors: Block bitmap for group 128 not in group (block 1630887232)! [17181637.320000] EXT2-fs: group descriptors corrupted! [17182320.532000] md: couldn't update array info. -22 [17182324.604000] md: couldn't update array info. -22
