Hi,
I have a raid array setup with 6 sata drives (500gb) and 4 ide drives
(250gb). My intention was to setup the disks as follows.
Personalities : [raid0] [raid6] [raid5] [raid4]
md2 : active raid6 md1[6](S) md0[7] sda[0] sdf[5] sde[4] sdd[3] sdc[2]
sdb[1]
2930318976 blocks level 6, 64k chunk, algorithm 2 [8/6] [UUUUUU__]
[>....................] recovery = 0.0% (249556/488386496)
finish=880.0min speed=9242K/sec
md1 : active raid0 hdh[0] hdc[1]
488396928 blocks 64k chunks
md0 : active raid0 hde[0] hdb[1]
488396928 blocks 64k chunks
unused devices: <none>
All works well until a system reboot. md2 appears to be brought up before
md0 and md1 which causes the raid to start without two of its drives.
Is there anyway to fix this?
--
View this message in context:
http://www.nabble.com/A-raid-in-a-raid.-tf4117582.html#a11709647
Sent from the linux-raid mailing list archive at Nabble.com.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
