On Fri, 24 Aug 2007, Tomasz Chmielewski wrote:
I built RAID-5 on a Debian Etch machine running 2.6.22.5 with this command:
mdadm --create /dev/md0 --chunk=64 --level=raid5 --raid-devices=5 /dev/sda1
/dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
After some time, it was synchronized just fine.
I removed one drive, put it back again, readded the drive to the array.
It started rebuilding.
However, if the rebuilding is not 100% done, and I reboot the machine,
rebuilding starts from 0.
Is it normal?
--
Tomasz Chmielewski
http://wpkg.org
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
It should continue (at least that is what I have seen in the past), not
sure if you need bitmaps or not (I dont use them).
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
