On Sunday October 14, [EMAIL PROTECTED] wrote: > Can someone tell me if I'm on the right track? > I've now noticed the following: > # ~/mdadm-2.6.3/mdadm -v -A /dev/md0 /dev/sd[d-e] > mdadm: looking for devices for /dev/md0 > mdadm: /dev/sdd is identified as a member of /dev/md0, slot -1. > mdadm: /dev/sde is identified as a member of /dev/md0, slot -1. > mdadm: No suitable drives found for /dev/md0
Hmm... that might be useful.. I just found your earlier email where you said: > After the machine came back up (on a rescue disk) I thought I'd > simply have to go through the process again. So I use add add the > new disk again. > Although that worked, I am now unable to resume the growing > process. Using "add add" again was not correct, and should not have been possible. You should have simply assembled the array with the full new set of devices. Then reshape would have automatically restarted properly. Can you remember *exactly* what you did? If I can reproduce the situation, I can find the best way to fix it and send you something to try. NeilBrown - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
