Bill Davidsen <[EMAIL PROTECTED]> writes:
> Janek Kozicki wrote:
>> Hello,
>>
>> My three HHDs have following speeds:
>>
>> hda - speed 70 MB/sec
>> hdc - speed 27 MB/sec
>> sda - speed 60 MB/sec
>>
>> They create a raid1 /dev/md0 and raid5 /dev/md1 arrays. I wanted to
>> ask if mdadm is trying to pick the fastest HDD during operation?
>>
>> Maybe I can "tell" which HDD is preferred?
>>
>
> If you are doing raid-1 between hdc and some faster drive, you could
> try using write-mostly and see go that works for you. For raid-5, it's
> faster to read the data off the slow drive than reconstruct it with
> multiple reads to multiple othjer faster drives.
Won't it naturally balance reads according to the disk speeds if there
are enough streams reading? I know raid1 prefers a disk that is
already near the location it wants. But won't it pick the first idle
one if there is no disk near the location? And the faster disk will be
idle more often.
MfG
Goswin
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
