The /dev/md0 is set as RAID0 "cat /proc/mdstat" shows md0 : active raid0 sda1[0] sdd1[3] sdc1[2] sdb1[1] 157307904 blocks 64k chunks
Then sdd is removed. But "cat /proc/mdsta" still shows the same information as above, while two RAID5 devices show their sdd parts as (F) md0 : active raid0 sda1[0] sdd1[3] sdc1[2] sdb1[1] 157307904 blocks 64k chunks Is this normal? Also, when using "mdadm --detail" sdd1( part of RAID0) is showed as "active sync", but sdd2(which is part of RAID5) is showed as "removed" Thank you. -- View this message in context: http://www.nabble.com/Is-that-normal-a-removed-part-in-RAID0-still-showed-as-%22active-sync%22-tp14670113p14670113.html Sent from the linux-raid mailing list archive at Nabble.com. - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
