On Wed, 21 Jul 1999, Jens Schleusener wrote:
> > # mkraid /dev/md0
> > handling MD device /dev/md0
> > analyzing super-block
> > disk 0: /dev/sdc1, 17920476kB, raid superblock at 17920384kB
> > disk 1: /dev/sdd1, 17920476kB, raid superblock at 17920384kB
> > disk 2: /dev/sde1, 8924076kB, raid superblock at 8923968kB
> > /dev/md0: Invalid argument
>
> The solution seems to set "chunk-size" in /etc/raidtab also for RAID
> linear (NOT mentioned in the Software-RAID HOWTO). I added the line
>
> chunk-size 4
>
> No idea if that value is really used and - if yes - what a good value is
> (I choosed a small value for good disk-space utilization).
I just wan't to mention that I have exact same problem as Jens. I am
using Redhat 6.0, upgraded to kernel 2.2.10 and corresponding raid
pachtes, and raidtools 0.90. I am also trying linear mode.
I have yet to try to set a chunk siz, though.
Perhaps this I is a problem with the 2.2.10kernel/raidpatch2.2.10/raidtools0.90?
Regards,
Thomas Willert http://willert.dk/
Bachstrasse 108a mailto:[EMAIL PROTECTED]
D - 22083 Hamburg Phone: +49 40 22748108
Member of Team #2115 - Check http://www.distributed.net/
"The software required 'Windows 95 or better', so I installed Linux."
