Bruno Prior writes:
> I don't understand this part of your message. Are you trying to use the
> "/boot=/dev/md?" line which was suggested in an earlier thread? I don't see how
> this works. Going back to Dirk Lutzebaeck's problem with this, he used
> "boot=/dev/md0". /dev/md0 is a mirror of /dev/sda1 and /dev/sdb1. Why then does
> lilo try to install to /dev/sda and /dev/sdb, not to /dev/sda1 and /dev/sdb1?
> Maybe this is what RedHat suggest, but I would have thought it was more
> transparent to specify where you want lilo to be installed with a
> "boot=/dev/sda" line, and an alternative lilo.conf which uses "boot=/dev/sdb;
> disk=/dev/sdb bios=0x80" to install lilo to the second disk. But then, I haven't
> installed RH 6.1, so I'm not talking from experience.
Is there some official blurb about lilo-0.21-10 from RH? They should
know what they did. Interestingly to know is that Theo had success
with this configuration on vanilla RH61.
Dirk