On Mon, 7 Feb 2000 [EMAIL PROTECTED] wrote:
> Hi !
> I did install the raid like it is described at
> http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/ with patch and latest
> raid-tools. After editing /etc/raidtab like sample with raid1
Hi Peter,
Run dmesg and look for a line like 'autodetecting RAID arrays'. If it's
not there, you're not running the patched code.
Something like this would work:
dmesg | grep -i raid
to show you any raid output from boot.
HTH,
Bill Carlson
------------
Systems Programmer [EMAIL PROTECTED] | Opinions are mine,
Virtual Hospital http://www.vh.org/ | not my employer's.
University of Iowa Hospitals and Clinics |
