Sorry if this comes twice, but netscape crashed right when I hit the
send button, so not sure if the first one made it.
Hello,
Looking for some help/advice. I'm trying to append three logical
drives defined on a HP NetRAID 3si Raid controller. The sizes of the
three logical drives are :363Gb, 101Gb and 34Gb. I have read through
the
Software-RAID.HOWTO.txt doc and have setup the kernel and raidtab file
as
specified in the doc (I'm running RH6.2) plus set the fd for the
partition types. Anyway when I run the mkraid
command this is what I get:
[root@megatera /etc]# mkraid /dev/md0
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/sdc1, 373414828kB, raid superblock at 373414720kB
disk 1: /dev/sdd1, 106687633kB, raid superblock at 106687552kB
disk 2: /dev/sde1, 35559846kB, raid superblock at 35559744kB
/dev/md0: Invalid argument
Here is what the /proc/mdstat file says:
[root@megatera raidtools-0.90]# more /proc/mdstat
Personalities : [linear]
read_ahead not set
unused devices: <none>
Have I hit a size limit on what the raidtools/kernel can handle?
Thanks...
--
C. J. Keist Email: [EMAIL PROTECTED]
UNIX/Network Manager Phone: 970-491-0630
Engineering Network Services Fax: 970-491-2465
College of Engineering, CSU
Ft. Collins, CO 80523-1301
