I think you're right
I might as well patch the source to bring it up to 2.2.15 as well
Gavin
on 5/26/00 3:54 AM, Alexandre Ghisoli wrote:
> Hi,
>
> Is your root partition on this adaptec card ?
> If yes, you _need_ to compile aic7xxx as kernel part (or, you can boot in 2
> stage, with ramdisk and initrd, but *much more* complicated).
>
> HTH
>
> -TheAl
>
>> -----Message d'origine-----
>> De: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]De la part de Gavin Clark
>> Date: vendredi, 26. mai 2000 11:35
>> À: [EMAIL PROTECTED]
>> Objet: I need a aic7xxx example for /etc/conf.modules
>>
>>
>>
>>
>> I can't get the module aic7xxx to mount at startup.
>>
>> could someone who has this working send me an example of thier
>> /etc/conf.modules file
>>
>> I have tried:
>>
>> alias eth0 eepro100
>> alias parport_lowlevel parport_pc
>> pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq
>> pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
>> alias block-major-8 aic7xxx
>>
>>
>> I have also tried this which was created by diskdrak I believe:
>> /etc/conf.modules:
>>
>> alias eth0 eepro100
>> alias parport_lowlevel parport_pc
>> pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq
>> pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
>> alias scsi_hostadapter aic7xxx
>> post-install supermount modprobe scsi_hostadapter
>>
>> thanks for your help
>>
>> Gavin
>>
>>
>
