Hi all
I've just compiled my 2.2.16 kernel to support raid1 and raid5.
I'm trying to set up both type of raid on my system, one raid1 and one
raid5, but I get an strange error .. :?
I'm using the raidtools package supplied with redhat 6.2 (I've compiled it
myself)
Here's a scerpt of what happens ... and NOTHING according to this is logged via syslog
Any idea?
[root->linux3 /root]# cat /etc/raidtab
########
# Raid 5
########
raiddev /dev/md0
raid-level 5
nr-raid-disks 3
nr-spare-disks 0
chunk-size 32
# the best one for maximum performance:
parity-algorithm left-symmetric
device /dev/sdb1
raid-disk 0
device /dev/sdc1
raid-disk 1
device /dev/sdd1
raid-disk 2
########
# Raid 1
########
raiddev /dev/md1
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
chunk-size 4
device /dev/sde1
raid-disk 0
device /dev/sdf1
raid-disk 1
[root->linux3 /root]# mkraid /dev/md0
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/sdb1, 4184901kB, raid superblock at 4184832kB
disk 1: /dev/sdc1, 4184901kB, raid superblock at 4184832kB
disk 2: /dev/sdd1, 4184901kB, raid superblock at 4184832kB
mkraid: aborted, see the syslog and /proc/mdstat for potential clues.
[root->linux3 /root]# mkraid /dev/md1
handling MD device /dev/md1
analyzing super-block
disk 0: /dev/sde1, 4184901kB, raid superblock at 4184832kB
disk 1: /dev/sdf1, 4184901kB, raid superblock at 4184832kB
mkraid: aborted, see the syslog and /proc/mdstat for potential clues.
[root->linux3 /root]# cat /proc/mdstat
Personalities : [3 raid1] [4 raid5]
read_ahead not set
md0 : inactive
md1 : inactive
md2 : inactive
md3 : inactive
[root->linux3 /root]#
--
Javi Polo - [EMAIL PROTECTED] - navo
Geek Code available in my home page (es que era mu tocho)
http://javipolo.ivworlds.org/
