Hi Kovlensky, I'm unsure of what version of Opensm this was added in, but the opensm console (see opensm manpage for console info), there is a "resweep [heavy|light]" command. Running "resweep heavy" should do exactly what you need.
Al On Fri, 2010-02-19 at 12:42 +0100, kovlen...@interia.pl wrote: > Hi, > > My case is simple - opensm does not recalculate paths unless necessary, > i.e. one of physical links on the way disappears. I just introduced > significant topology changes and need opensm to take them into > consideration. New links were added, a lot of them. Is there any way of > telling opensm to recalculate all paths? At the moment all new links are > happily ignored and i can find no way of doing that live. > > My vendor has bad habit of asking me to add ib link here and there to > nullify bottleneck identified and, well, while all new paths are up, I can > find no way of rebalancing paths, so they stay unused. > > I'm running OFED-1.3.2-20090119-0501, so all ideas for this version or a > newer one are welcome. > > Regards, > > kovlensky > > > ---------------------------------------------------------------------- > Szybkie i niedrogie... Tylko dla mezczyzn! > Sprawdz >>> http://*link.interia.pl/f25a7 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-rdma" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://*vger.kernel.org/majordomo-info.html > -- Albert Chu ch...@llnl.gov Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html