Hal,

Thanks for looking at all of this with me. ifconfig output is below.

On 7/22/2010 12:08 PM, Hal Rosenstock wrote:
Tom,

On Thu, Jul 22, 2010 at 1:19 PM, Tom Ammon<tom.am...@utah.edu>  wrote:
Hal,

On 7/21/2010 2:45 PM, Hal Rosenstock wrote:

Hi Tom,

On 7/19/10, Tom Ammon<tom.am...@utah.edu>    wrote:

I'm trying to set up partitions in a little test environment, and I'm
having trouble.

I have opensm running on a machine attached to the fabric, and sminfo on
the other machines confirm that this is indeed the master SM. Here's my
/etc/opensm/partitions.conf:

Default=0xffff , ipoib : ALL, SELF=full ;
PartitionBlue=0x8004, ipoib : 0x0002c9030009cb3f=full,
0x0002c90200252841=full, 0x0002c90200243471=full ;
PartitionRed=0x8005, ipoib : 0x0002c90200252841=full,
0x0002c90200243591=full, 0x0002c9030009cb2b=full ;

You don't really need the 0x8000 bit on in the pkeys but I don't think
it does any harm.

But when I go to the machine with port GUID 0x0002c90200243471, it
doesn't appear that it's getting the pkey I wanted:

[r...@stagnate ~]# ibstat
CA 'mthca0'
          CA type: MT23108
          Number of ports: 2
          Firmware version: 3.3.5
          Hardware version: a1
          Node GUID: 0x0002c90200243470
          System image GUID: 0x0002c90200243473
          Port 1:
                  State: Active
                  Physical state: LinkUp
                  Rate: 10
                  Base lid: 10
                  LMC: 0
                  SM lid: 4
                  Capability mask: 0x02510a68
                  Port GUID: 0x0002c90200243471
          Port 2:
                  State: Down
                  Physical state: Polling
                  Rate: 2
                  Base lid: 0
                  LMC: 0
                  SM lid: 0
                  Capability mask: 0x02510a68
                  Port GUID: 0x0002c90200243472

[r...@stagnate ~]# cat /sys/class/net/ib0/pkey
0xffff

What does:

smpquery pkeys 10 1

say ? Do you see the other pkey(s) on that port ?

[r...@stagnate ~]# smpquery pkeys 10 1
   0: 0x7fff 0x8004 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
   8: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  16: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  24: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  32: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  40: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  48: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  56: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
64 pkeys capacity for this port

So I see that both 7fff and 8004 are being assigned to this port. Is that
okay?

Yes.

  Is there any problem with the machine also being in the default
partition?

No.

As I look around at all of the machines with smpquery, it appears that they
are all being assigned 7fff and the pkey that I assigned in partitions.conf.

Good.

But the machine that I want to run 2 child interfaces on is having issues.
It's at LID 7 and here's what smpquery says:

[r...@stagnate ~]# smpquery pkeys 7 1
   0: 0x7fff 0x8004 0x8005 0x0000 0x0000 0x0000 0x0000 0x0000
   8: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  16: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  24: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  32: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  40: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  48: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
  56: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
64 pkeys capacity for this port

So that's fine, but when I try to create a child interface I get this:

[r...@labdisk01 ~]# echo 0x8004>  /sys/class/net/ib0/create_child
-bash: echo: write error: Name not unique on network

I don't know what cause that error. Maybe someone else can help here.

Are you sure the ib0 interface is OK ? What does ifconfig ib0 say ?

Here's ifconfig ib0:

ib0 Link encap:InfiniBand HWaddr 80:00:04:04:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
          inet6 addr: fe80::202:c902:25:2841/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:65520  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:17 errors:0 dropped:7 overruns:0 carrier:0
          collisions:0 txqueuelen:256
          RX bytes:56 (56.0 b)  TX bytes:3529 (3.4 KiB)


Then I brought up the "sub"interfaces with "ifup ib0.8004" "ifup ib0.8005" . Still get the "Name not unique on network" message if I switch the order and do ifup followed by echo 0x8004....etc.


ib0.8004 Link encap:InfiniBand HWaddr 80:00:04:06:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
          inet addr:10.0.0.2  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::202:c902:25:2841/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:65520  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78 errors:0 dropped:17 overruns:0 carrier:0
          collisions:0 txqueuelen:256
          RX bytes:0 (0.0 b)  TX bytes:14620 (14.2 KiB)

ib0.8005 Link encap:InfiniBand HWaddr 80:00:04:07:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
          inet addr:192.168.10.2  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::202:c902:25:2841/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:65520  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:72 errors:0 dropped:18 overruns:0 carrier:0
          collisions:0 txqueuelen:256
          RX bytes:0 (0.0 b)  TX bytes:14269 (13.9 KiB)


Also, here's some junk from /var/log/messages, seemed like it might be relevant, but maybe this is just IP stuff:

Jul 22 14:38:37 labdisk01 kernel: ADDRCONF(NETDEV_UP): ib0.8004: link is not ready Jul 22 14:38:37 labdisk01 kernel: ADDRCONF(NETDEV_CHANGE): ib0.8004: link becomes ready Jul 22 14:38:39 labdisk01 avahi-daemon[4056]: New relevant interface ib0.8004.IPv6 for mDNS. Jul 22 14:38:39 labdisk01 avahi-daemon[4056]: Joining mDNS multicast group on interface ib0.8004.IPv6 with address fe80::202:c902:25:2841. Jul 22 14:38:39 labdisk01 avahi-daemon[4056]: Registering new address record for fe80::202:c902:25:2841 on ib0.8004. Jul 22 14:38:41 labdisk01 avahi-daemon[4056]: New relevant interface ib0.8004.IPv4 for mDNS. Jul 22 14:38:41 labdisk01 avahi-daemon[4056]: Joining mDNS multicast group on interface ib0.8004.IPv4 with address 10.0.0.2. Jul 22 14:38:41 labdisk01 avahi-daemon[4056]: Registering new address record for 10.0.0.2 on ib0.8004. Jul 22 14:39:22 labdisk01 kernel: ADDRCONF(NETDEV_UP): ib0.8005: link is not ready Jul 22 14:39:22 labdisk01 kernel: ADDRCONF(NETDEV_CHANGE): ib0.8005: link becomes ready Jul 22 14:39:24 labdisk01 avahi-daemon[4056]: New relevant interface ib0.8005.IPv6 for mDNS. Jul 22 14:39:24 labdisk01 avahi-daemon[4056]: Joining mDNS multicast group on interface ib0.8005.IPv6 with address fe80::202:c902:25:2841. Jul 22 14:39:24 labdisk01 avahi-daemon[4056]: Registering new address record for fe80::202:c902:25:2841 on ib0.8005. Jul 22 14:39:26 labdisk01 avahi-daemon[4056]: New relevant interface ib0.8005.IPv4 for mDNS. Jul 22 14:39:26 labdisk01 avahi-daemon[4056]: Joining mDNS multicast group on interface ib0.8005.IPv4 with address 192.168.10.2. Jul 22 14:39:26 labdisk01 avahi-daemon[4056]: Registering new address record for 192.168.10.2 on ib0.8005.




My plan was to create two child interfaces (0x8004 and 0x8005) and then
ifconfig ib0.8004 and ifconfig ib0.8005 to assign them to separate subnets.

That should be fine.

-- Hal

Tom



The pkey you are seeing is the only one for ib0 interface.













If you want to have IPoIB interfaces on the other partitions too, you
need to set this up by creating a child interface on those nodes; you
had asked about that in a previous email
(http://www.mail-archive.com/linux-rdma@vger.kernel.org/msg04728.html).

-- Hal


I'm trying to run one ipoib subnet in each partition, and then
eventually the goal is to have a different server that has 2 child
interfaces, one on each subnet. But it doesn't appear that my partition
configuration is even correct. Is there a syntax error, or something
else I am missing?

Thanks,

Tom



--
Tom Ammon
Network Engineer
Office: 801.587.0976
Mobile: 801.674.9273

Center for High Performance Computing
University of Utah
http://www.chpc.utah.edu
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
Tom Ammon
Network Engineer
Office: 801.587.0976
Mobile: 801.674.9273

Center for High Performance Computing
University of Utah
http://www.chpc.utah.edu


--
Tom Ammon
Network Engineer
Office: 801.587.0976
Mobile: 801.674.9273

Center for High Performance Computing
University of Utah
http://www.chpc.utah.edu
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to