On Thu, 2 Sep 2010 06:56:50 -0700 Chuck Hartley <hartlc...@gmail.com> wrote:
> We swapped in a different switch and see the same errors. The opensm > logfile does not show any errors: Could you run "ibstat" on the node with OpenSM running? And "iblinkinfo" on the same node? Send that output. Ira > > ------------------------------------------------- > OpenSM 3.3.5 > Command Line Arguments: > Daemon mode > Log File: /var/log/opensm.log > ------------------------------------------------- > OpenSM 3.3.5 > > Sep 02 05:56:29 933684 [B53B8700] 0x80 -> OpenSM 3.3.5 > Entering DISCOVERING state > > Sep 02 05:56:29 934931 [B53B8700] 0x02 -> osm_vendor_init: 1000 > pending umads specified > Sep 02 05:56:29 935079 [B53B8700] 0x80 -> Entering DISCOVERING state > Using default GUID 0x2c90300032de1 > Entering MASTER state > > Sep 02 05:56:29 953763 [B53B8700] 0x02 -> osm_vendor_bind: Binding to > port 0x2c90300032de1 > Sep 02 05:56:29 990146 [B53B8700] 0x02 -> osm_vendor_bind: Binding to > port 0x2c90300032de1 > Sep 02 05:56:29 990240 [B53B8700] 0x02 -> osm_opensm_bind: Setting > IS_SM on port 0x0002c90300032de1 > Sep 02 05:56:30 009040 [AF1DB710] 0x80 -> Entering MASTER state > SUBNET UP > > Sep 02 05:56:30 009885 [AF1DB710] 0x02 -> osm_ucast_mgr_process: > minhop tables configured on all switches > Sep 02 05:56:30 014593 [AF1DB710] 0x80 -> SUBNET UP > > > On Thu, Sep 2, 2010 at 8:56 AM, Hal Rosenstock <hal.rosenst...@gmail.com> > wrote: > > On Thu, Sep 2, 2010 at 8:34 AM, Chuck Hartley <hartlc...@gmail.com> wrote: > >> Hello, > >> > >> We installed 1.5.1 and are having problems getting the IB fabric > >> working. ibv_devinfo shows the HCAs ports are ok and ibdiagnet reports > >> no errors. However, ibchecknet shows that the switch ports are not > >> being configured. We have never seen this before and are at a loss as > >> to where the problem might be - would someone please point us in the > >> right direction to look? Could it be a problem with the switch > >> itself? Output from ibchecknet below. > >> > >> > >> # ibchecknet > >> Error check on lid 3 (Infiniscale-IV Mellanox Technologies) port all: > >> FAILED > >> ibwarn: [26732] dump_perfcounters: PortXmitWait not indicated so > >> ignore this counter > >> #warn: Lid is not configured lid 3 port 7 > >> #warn: SM Lid is not configured > > > > Is there an SM running on your subnet ? If so, I think that the lack > > of an SM could account for all of the issues mentioned here. > > > > -- Hal > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-rdma" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://*vger.kernel.org/majordomo-info.html > -- Ira Weiny Math Programmer/Computer Scientist Lawrence Livermore National Lab 925-423-8008 wei...@llnl.gov -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html