Christoph Lameter <c...@linux.com> wrote on 09/22/2010 02:33:14 PM: This can address issues where joins are slow because the initial join is > frequently lost. > > Also increment the frequency so that we get a 10 reports send over a > few seconds.
Except you want to conform and not conform at the same time. :-) IGMPv2 should be: default count 2, interval 10secs IGMPv3 should be: default count 2, interval 1sec ...and no way is it a good idea to send 10 unsolicited reports on an Ethernet. I think system-wide defaults must be as suggested (which allows for v3 being shortened to 1sec, but not v2) and if you want to use longer values, you should have either a *per-interface* tunable [ie, the default value for your interface only] or make these per-interface variables and have the IB code bump them up for IB interfaces only. An attached Ethernet on the same system shouldn't be using larger values unless bumped for some reason by an administrator. There is no problem with current values on Ethernet; lets not create one. :-) +-DLS -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html