The following extended speeds are introduced: FDR-10 - is a proprietary link speed which is 10.3125 Gbps at 64/66 encoding rather than 8b10b encoding. FDR - represents the IBA extended speed: 14.0625 Gbps. EDR - represents the IBA extended speed: 25.78125 Gbps.
Signed-off-by: Marcel Apfelbaum <marc...@dev.mellanox.co.il> Reviewed-by: Hal Rosenstock <h...@mellanox.com> --- Changes from v1 - Removed ib_active_speed_to_rate function - Moved ib_active_speed_to_rate code into rate_show method drivers/infiniband/core/sysfs.c | 26 ++++++++++++++++++++++---- drivers/infiniband/core/verbs.c | 25 +++++++++++++++++++++++++ include/rdma/ib_verbs.h | 18 +++++++++++++++++- 3 files changed, 64 insertions(+), 5 deletions(-) --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -185,17 +185,35 @@ static ssize_t rate_show(struct ib_port if (ret) return ret; + rate = (25 * attr.active_speed) / 10; + switch (attr.active_speed) { - case 2: speed = " DDR"; break; - case 4: speed = " QDR"; break; + case 2: + speed = " DDR"; + break; + case 4: + speed = " QDR"; + break; + case 8: + speed = " FDR10"; + rate = 10; + break; + case 16: + speed = " FDR"; + rate = 14; + break; + case 32: + speed = " EDR"; + rate = 25; + break; } - rate = 25 * ib_width_enum_to_int(attr.active_width) * attr.active_speed; + rate *= ib_width_enum_to_int(attr.active_width); if (rate < 0) return -EINVAL; return sprintf(buf, "%d%s Gb/sec (%dX%s)\n", - rate / 10, rate % 10 ? ".5" : "", + rate, (attr.active_speed == 1) ? ".5" : "", ib_width_enum_to_int(attr.active_width), speed); } --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -77,6 +77,31 @@ enum ib_rate mult_to_ib_rate(int mult) } EXPORT_SYMBOL(mult_to_ib_rate); +int ib_rate_to_mbps(enum ib_rate rate) +{ + switch (rate) { + case IB_RATE_2_5_GBPS: return 2500; + case IB_RATE_5_GBPS: return 5000; + case IB_RATE_10_GBPS: return 10000; + case IB_RATE_20_GBPS: return 20000; + case IB_RATE_30_GBPS: return 30000; + case IB_RATE_40_GBPS: return 40000; + case IB_RATE_60_GBPS: return 60000; + case IB_RATE_80_GBPS: return 80000; + case IB_RATE_120_GBPS: return 120000; + case IB_RATE_14_GBPS: return 14062; + case IB_RATE_56_GBPS: return 56250; + case IB_RATE_112_GBPS: return 112500; + case IB_RATE_168_GBPS: return 168750; + case IB_RATE_25_GBPS: return 25781; + case IB_RATE_100_GBPS: return 103125; + case IB_RATE_200_GBPS: return 206250; + case IB_RATE_300_GBPS: return 309375; + default: return -1; + } +} +EXPORT_SYMBOL(ib_rate_to_mbps); + enum rdma_transport_type rdma_node_get_transport(enum rdma_node_type node_type) { --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -207,6 +207,7 @@ enum ib_port_cap_flags { IB_PORT_SM_DISABLED = 1 << 10, IB_PORT_SYS_IMAGE_GUID_SUP = 1 << 11, IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP = 1 << 12, + IB_PORT_EXTENDED_SPEEDS_SUP = 1 << 14, IB_PORT_CM_SUP = 1 << 16, IB_PORT_SNMP_TUNNEL_SUP = 1 << 17, IB_PORT_REINIT_SUP = 1 << 18, @@ -415,7 +416,15 @@ enum ib_rate { IB_RATE_40_GBPS = 7, IB_RATE_60_GBPS = 8, IB_RATE_80_GBPS = 9, - IB_RATE_120_GBPS = 10 + IB_RATE_120_GBPS = 10, + IB_RATE_14_GBPS = 11, + IB_RATE_56_GBPS = 12, + IB_RATE_112_GBPS = 13, + IB_RATE_168_GBPS = 14, + IB_RATE_25_GBPS = 15, + IB_RATE_100_GBPS = 16, + IB_RATE_200_GBPS = 17, + IB_RATE_300_GBPS = 18 }; /** @@ -427,6 +436,13 @@ enum ib_rate { int ib_rate_to_mult(enum ib_rate rate) __attribute_const__; /** + * ib_rate_to_mbps - Convert the IB rate enum to Mbps. + * For example, IB_RATE_2_5_GBPS will be converted to 2500. + * @rate: rate to convert. + */ +int ib_rate_to_mbps(enum ib_rate rate) __attribute_const__; + +/** * mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate * enum. * @mult: multiple to convert. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html