Vladimir Sokolovsky <v...@dev.mellanox.co.il> wrote: > On 11/12/2011 05:15 PM, Lukas Razik wrote:
>> Hello Mr. Sokolovsky, >> >> i've built OFED-1.5.3.2 for a linux-2.6.39.4 sparc64 (vanilla) kernel. > The IPoIB stuff works fine. >> >> If I run 'ibv_devinfo' I get: >> --- >> >> hca_id: mlx4_0 >> transport: InfiniBand (0) >> fw_ver: 2.6.628 >> node_guid: 0003:ba00:0100:b1d8 >> sys_image_guid: 0003:ba00:0100:b1db >> vendor_id: 0x03ba >> vendor_part_id: 25418 >> hw_ver: 0xA0 >> board_id: SUN0070000001 >> phys_port_cnt: 2 >> port: 1 >> state: PORT_ACTIVE (4) >> max_mtu: 2048 (4) >> active_mtu: 2048 (4) >> sm_lid: 1 >> port_lid: 6 >> port_lmc: 0x00 >> link_layer: IB[...] >> --- >> > > > Hello Lukas, > Try to update HCA's firmware to the latest version > (http://www.mellanox.com/content/pages.php?pg=firmware_download). Hello Vladimir, many, many thanks for your fast answer! But now I have two big problems: 1. problem: The board ID is SUN0070000001 . If I compare the ibv_devinfo output (mstflint doesn't show me the chip rev.) with the Mellanox table I think it's a ConnectX adapter, isn't it? http://www.mellanox.com/content/pages.php?pg=firmware_HCA_FW_identification So do I get the INI file _and_ the FW file from Oracle? If I get the INI file only - do I need the following FW file then? http://www.mellanox.com/downloads/firmware/disclaimer.php?download=/downloads/firmware/ConnectX-rel-2_9_1000.tgz 2. problem: For burning the firmware I need the MFT package, right? But Mellanox doesn't provide it for sparc64. I could build the kernel modules of kernel-mft-2.7.1-7.src.rpm without any problems. But the user space stuff is ppc64, x86 and x86_64 only... Is there maybe a possibility to get sparc64 binaries? Best regards, Lukas PS: That's the output of mstflint # mstflint -d 12:00.0 q Image type: ConnectX FW Version: 2.6.628 Device ID: 25418 Description: Node Port1 Port2 Sys image GUIDs: 0003ba000100b1d8 0003ba000100b1d9 0003ba000100b1da 0003ba000100b1db MACs: 0002c9000001 0002c9000002 Board ID: n/a (SUN0070000001) VSD: n/a PSID: SUN0070000001 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
