2014-02-04 18:19 GMT+04:00 Vasiliy Tolstov <v.tols...@selfip.ru>: > 2014-02-04 Vasiliy Tolstov <v.tols...@selfip.ru>: >>> This is pretty much very old firmware, could you update it please with >>> the latest GA from the mellanox site and see if things smile back? >>> also send the "lspci | grep -i Mellanox" > > > I'm update firmware to 2.7.200 (that is the latest from ftp > supermicro). Now i'm try to test it.
Sorry for bumping old thread. Now i again have this error: ibstat: CA 'mlx4_0' CA type: MT26428 Number of ports: 1 Firmware version: 2.7.5558 Hardware version: a0 Node GUID: 0x003048ffff9dc9d8 System image GUID: 0x003048ffff9dc9db Port 1: State: Active Physical state: LinkUp Rate: 40 Base lid: 7 LMC: 0 SM lid: 6 Capability mask: 0x02510868 dmesg: [1067167.780266] <mlx4_ib> destroy_qp_common: modify QP 00110e to RESET failed. [1068708.243893] <mlx4_ib> destroy_qp_common: modify QP 001118 to RESET failed. [1174994.897394] mlx4_core 0000:03:00.0: Internal error detected: [1174994.897484] mlx4_core 0000:03:00.0: buf[00]: 001805a5 [1174994.897516] mlx4_core 0000:03:00.0: buf[01]: 00000000 [1174994.897544] mlx4_core 0000:03:00.0: buf[02]: 200715b6 [1174994.897577] mlx4_core 0000:03:00.0: buf[03]: 00000000 [1174994.897607] mlx4_core 0000:03:00.0: buf[04]: 0018050c [1174994.897637] mlx4_core 0000:03:00.0: buf[05]: 00000001 [1174994.897666] mlx4_core 0000:03:00.0: buf[06]: 00002fd8 [1174994.897697] mlx4_core 0000:03:00.0: buf[07]: 00000084 [1174994.897727] mlx4_core 0000:03:00.0: buf[08]: 0000db9f [1174994.897756] mlx4_core 0000:03:00.0: buf[09]: 00004000 [1174994.897786] mlx4_core 0000:03:00.0: buf[0a]: 00000000 [1174994.897815] mlx4_core 0000:03:00.0: buf[0b]: 00000000 [1174994.897845] mlx4_core 0000:03:00.0: buf[0c]: 00000000 [1174994.897874] mlx4_core 0000:03:00.0: buf[0d]: 00000000 [1174994.897904] mlx4_core 0000:03:00.0: buf[0e]: 00000000 [1174994.897934] mlx4_core 0000:03:00.0: buf[0f]: 00000000 [1174994.897963] mlx4_en 0000:03:00.0: Internal error detected, restarting device [1175000.294830] <mlx4_ib> destroy_qp_common: modify QP 001eca to RESET failed. [1175000.352029] bonding: bond1: releasing active interface ib0 [1175000.352072] bonding: bond1: Warning: clearing HW address of bond1 while it still has VLANs. [1175000.352182] bonding: bond1: When re-adding slaves, make sure the bond's HW address matches its VLANs'. [1175000.352517] bonding: bond1: destroying bond bond1. [1175000.354034] bonding: bond1: released all slaves [1175000.354694] ib0: ib_cq_destroy (recv) failed [1175000.354721] ib0: ib_destroy_srq failed: -16 [1175000.355780] ib0: ib_dealloc_pd failed -- Vasiliy Tolstov, e-mail: v.tols...@selfip.ru jabber: v...@selfip.ru -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html