Adds CAN controller nodes for r8a7795. Note: CAN channel register base address mentioned in R-Car Gen3 Hardware User Manual v0.5E is incorrect. The corrected base addresses are:
CAN Channel 0 - 0xe6c30000 CAN Channel 1 - 0xe6c38000 Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasunda...@bp.renesas.com> --- Hi All, This patch is based on linux-next (tag:next-20160225) with following patch applied on top [PATCH v2] arm64: dts: r8a7795: Add CAN external clock support The respective CAN subsystem changes are submitted separately here (http://marc.info/?l=linux-can&m=145674974416086&w=2) arch/arm64/boot/dts/renesas/r8a7795.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 4049182..a88f8d8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -523,6 +523,36 @@ #size-cells = <0>; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&cpg>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&cpg>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", -- 1.9.1
