Hi Simon, Magnus, Jon, This patch series corrects the interrupt type for ARM TWD timers on SH-Mobile AG5 and R-Car H1.
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For SH-Mobile AG5 and R-Car H1 devices the PPI type cannot be set, and so when we attempt to set the type for the ARM TWD interrupt it fails. This has gone unnoticed because it fails silently, and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. This was exposed by Jon Hunter's "[PATCH 04/15] irqchip/gic: WARN if setting the interrupt type fails" (https://lkml.org/lkml/2016/3/17/339), which triggers: WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-gic-common.c:61 gic_configure_irq+0x64/0x7c() Other Renesas SoCs using private peripheral interrupts (R-Mobile APE6, R-Car Gen2, and R-Car Gen3) seem to be fine. Based on patches by Jon Hunter for Tegra20/30 and OMAP4. Thanks! Geert Uytterhoeven (2): ARM: dts: sh73a0: Correct interrupt type for ARM TWD ARM: dts: r8a7779: Correct interrupt type for ARM TWD arch/arm/boot/dts/r8a7779.dtsi | 2 +- arch/arm/boot/dts/sh73a0.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) -- 1.9.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds