From: Wolfram Sang <wsa+rene...@sang-engineering.com>
FW_LOADER works fine, no need for a open coded fallback.
Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
---
drivers/staging/ks7010/Kconfig | 1 +
drivers/staging/ks7010/ks7010_config.c | 62 ----------------------------------
drivers/staging/ks7010/ks7010_sdio.c | 56 ------------------------------
drivers/staging/ks7010/ks7010_sdio.h | 5 ---
4 files changed, 1 insertion(+), 123 deletions(-)
diff --git a/drivers/staging/ks7010/Kconfig b/drivers/staging/ks7010/Kconfig
index dfd4eed539bebc..0b9217674d5b54 100644
--- a/drivers/staging/ks7010/Kconfig
+++ b/drivers/staging/ks7010/Kconfig
@@ -3,6 +3,7 @@ config KS7010
depends on MMC && WIRELESS
select WIRELESS_EXT
select WEXT_PRIV
+ select FW_LOADER
help
This is a driver for KeyStream KS7010 based SDIO WIFI cards. It is
found on at least later Spectec SDW-821 (FCC-ID "S2Y-WLAN-11G-K" only,
diff --git a/drivers/staging/ks7010/ks7010_config.c
b/drivers/staging/ks7010/ks7010_config.c
index e8a42077a4b381..7d33070b3428e7 100644
--- a/drivers/staging/ks7010/ks7010_config.c
+++ b/drivers/staging/ks7010/ks7010_config.c
@@ -169,11 +169,7 @@ int rate_set_configuration(ks_wlan_private *priv, char
*value)
return rc;
}
-#ifndef NO_FIRMWARE_CLASS
#include <linux/firmware.h>
-#else
-#define MAX_CONFIG_FILE_SIZE (1024*10)
-#endif
int ks_wlan_read_config_file(ks_wlan_private *priv)
{
struct {
@@ -206,18 +202,9 @@ int ks_wlan_read_config_file(ks_wlan_private *priv)
{0,"",""},
};
-#ifndef NO_FIRMWARE_CLASS
const struct firmware *fw_entry;
struct device *dev = NULL;
int retval;
-#else
- struct file *srcf;
- int nr_read ;
- int retval;
- char *cfg_buf=NULL;
- int orgfsuid, orgfsgid;
- mm_segment_t orgfs;
-#endif
char cfg_file[]=CFG_FILE;
char *cur_p, *end_p;
char wk_buff[256], *wk_p;
@@ -267,7 +254,6 @@ int ks_wlan_read_config_file(ks_wlan_private *priv)
priv->reg.tx_rate = TX_RATE_FULL_AUTO;
priv->reg.rate_set.size = 12;
-#ifndef NO_FIRMWARE_CLASS
dev = &priv->ks_wlan_hw.sdio_card->func->dev;
if((retval = request_firmware(&fw_entry, cfg_file, dev)) !=0 ){
DPRINTK(1, "error request_firmware() file=%s ret=%d\n",
cfg_file, retval);
@@ -277,46 +263,6 @@ int ks_wlan_read_config_file(ks_wlan_private *priv)
DPRINTK(4, "success request_firmware() file=%s size=%d\n", cfg_file,
fw_entry->size);
cur_p = fw_entry->data;
end_p = cur_p + fw_entry->size;
-#else
- orgfsuid=current->fsuid;
- orgfsgid=current->fsgid;
- orgfs=get_fs();
- set_fs(KERNEL_DS);
-
- srcf = filp_open(cfg_file, O_RDONLY, 0);
- if (IS_ERR(srcf)) {
- printk(KERN_ERR "error %ld opening %s\n",
-PTR_ERR(srcf),cfg_file);
- goto no_config_file;
- }
-
- if (!(srcf->f_op && srcf->f_op->read)) {
- printk(KERN_ERR "%s does not have a read
method\n", cfg_file);
- goto no_config_file;
- }
-
- cfg_buf = (char *)kzalloc(MAX_CONFIG_FILE_SIZE, GFP_ATOMIC);
- if (!cfg_buf) {
- printk(KERN_ERR "%s does not read : out of
memory \n", cfg_file);
- goto no_config_file;
- }
-
- nr_read = srcf->f_op->read(srcf, (unsigned char *)cfg_buf,
MAX_CONFIG_FILE_SIZE, &srcf->f_pos);
-
- DPRINTK(1, "read retval=%d file=%s\n", nr_read, priv->reg.cfg_file);
- retval=filp_close(srcf ,NULL);
- if (retval)
- DPRINTK(1, "error %d closing %s\n", -retval,priv->reg.cfg_file);
-
- if (nr_read < 1) {
- printk(KERN_ERR "%s does not read : file is
empty num=%d\n", cfg_file, nr_read);
- goto no_config_file;
- }else if(nr_read > MAX_CONFIG_FILE_SIZE){
- printk(KERN_ERR "%s does not read : file is too
big \n", cfg_file);
- goto no_config_file;
- }
- cur_p = cfg_buf;
- end_p = cur_p + nr_read;
-#endif
*end_p = '\0';
while (cur_p < end_p) {
@@ -524,15 +470,7 @@ int ks_wlan_read_config_file(ks_wlan_private *priv)
}
}
-#ifndef NO_FIRMWARE_CLASS
release_firmware(fw_entry);
-#else
-no_config_file:
- kfree(cfg_buf);
- set_fs(orgfs);
- current->fsuid=orgfsuid;
- current->fsgid=orgfsgid;
-#endif
DPRINTK(3,"\n operation_mode = %d\n channel = %d\n ssid = %s\n
tx_rate = %d\n \
preamble = %d\n powermgt = %d\n scan_type = %d\n beacon_lost_count
= %d\n rts = %d\n \
diff --git a/drivers/staging/ks7010/ks7010_sdio.c
b/drivers/staging/ks7010/ks7010_sdio.c
index 7cc49a4ccac549..9300658c4aed8d 100644
--- a/drivers/staging/ks7010/ks7010_sdio.c
+++ b/drivers/staging/ks7010/ks7010_sdio.c
@@ -56,10 +56,6 @@ static int ks7010_sdio_read( ks_wlan_private *priv, unsigned
int address,
unsigned char *buffer, int length );
static int ks7010_sdio_write( ks_wlan_private *priv, unsigned int address,
unsigned char *buffer, int length );
-#ifdef NO_FIRMWARE_CLASS
-static char *romfile = ROM_FILE;
-module_param(romfile, charp, S_IRUGO);
-#endif
/* macro */
#define inc_txqhead(priv) \
@@ -723,23 +719,15 @@ error_out:
if(read_buf) kfree(read_buf);
return rc;
}
-#ifndef NO_FIRMWARE_CLASS
#include <linux/firmware.h>
-#endif
static int ks79xx_upload_firmware(ks_wlan_private *priv, struct ks_sdio_card
*card)
{
unsigned int size, offset, n = 0;
unsigned char *rom_buf;
unsigned char rw_data =0;
int retval, rc=0;
-#ifndef NO_FIRMWARE_CLASS
int length;
const struct firmware *fw_entry = NULL;
-#else
- int orgfsuid, orgfsgid;
- struct file *srcf;
- mm_segment_t orgfs;
-#endif
rom_buf = NULL;
@@ -758,38 +746,16 @@ static int ks79xx_upload_firmware(ks_wlan_private *priv,
struct ks_sdio_card *ca
goto error_out0;
}
-#ifndef NO_FIRMWARE_CLASS
if(request_firmware(&fw_entry, priv->reg.rom_file,
&priv->ks_wlan_hw.sdio_card->func->dev)!=0){
DPRINTK(1,"error request_firmware() file=%s\n",
priv->reg.rom_file);
return 1;
}
DPRINTK(4,"success request_firmware() file=%s size=%d\n",
priv->reg.rom_file, fw_entry->size);
length = fw_entry->size;
-#else
- orgfsuid=current->fsuid;
- orgfsgid=current->fsgid;
- current->fsuid=current->fsgid=0;
- orgfs=get_fs();
- set_fs(KERNEL_DS);
-
- srcf = filp_open(romfile, O_RDONLY, 0);
- if (IS_ERR(srcf)) {
- DPRINTK(1, "error %ld opening %s\n", -PTR_ERR(srcf),romfile);
- rc = 1;
- goto error_out1;
- }
-
- if (!(srcf->f_op && srcf->f_op->read)) {
- DPRINTK(1, "%s does not have a read method\n", romfile);
- rc = 2;
- goto error_out2;
- }
-#endif
/* Load Program */
n = 0;
do {
-#ifndef NO_FIRMWARE_CLASS
if(length >= ROM_BUFF_SIZE){
size = ROM_BUFF_SIZE;
length = length - ROM_BUFF_SIZE;
@@ -801,16 +767,6 @@ static int ks79xx_upload_firmware(ks_wlan_private *priv,
struct ks_sdio_card *ca
DPRINTK(4, "size = %d\n",size);
if(size == 0) break;
memcpy(rom_buf,fw_entry->data+n,size);
-#else
- /* The object must have a read method */
- size = srcf->f_op->read(srcf, rom_buf, ROM_BUFF_SIZE,
&srcf->f_pos);
- if (size < 0) {
- DPRINTK(1, "Read %s error %d\n", priv->reg.rom_file,
-retval);
- rc = 5;
- goto error_out2;
- }
- else if (size == 0) break;
-#endif
/* Update write index */
offset = n;
retval = ks7010_sdio_update_index(priv,
KS7010_IRAM_ADDRESS+offset);
@@ -852,20 +808,8 @@ static int ks79xx_upload_firmware(ks_wlan_private *priv,
struct ks_sdio_card *ca
rc = 0;
-#ifdef NO_FIRMWARE_CLASS
- error_out2:
- retval=filp_close(srcf ,NULL);
- if (retval)
- DPRINTK(1, "error %d closing %s\n", -retval,priv->reg.rom_file);
-
- error_out1:
- set_fs(orgfs);
- current->fsuid=orgfsuid;
- current->fsgid=orgfsgid;
-#else
error_out1:
release_firmware(fw_entry);
-#endif
error_out0:
sdio_release_host(card->func);
if(rom_buf)
diff --git a/drivers/staging/ks7010/ks7010_sdio.h
b/drivers/staging/ks7010/ks7010_sdio.h
index 3af742f1b79f93..5bf01abbf2ab6c 100644
--- a/drivers/staging/ks7010/ks7010_sdio.h
+++ b/drivers/staging/ks7010/ks7010_sdio.h
@@ -153,13 +153,8 @@ struct rx_device{
unsigned int qtail; /* rx buffer queue last pointer */
spinlock_t rx_dev_lock;
};
-#ifndef NO_FIRMWARE_CLASS
#define ROM_FILE "ks7010sd.rom"
#define CFG_FILE "ks79xx.cfg"
-#else
-#define ROM_FILE "/lib/firmware/ks7010sd.rom"
-#define CFG_FILE "/lib/firmware/ks79xx.cfg"
-#endif
#define KS_WLAN_DRIVER_VERSION_INFO "ks7010 sdio linux 007"
#endif /* _KS7010_SDIO_H */
--
2.8.1
