On 05/11/2016 04:02 PM, Ulrich Hecht wrote:
> From: William Towle <william.to...@codethink.co.uk>
>
> Add logic such that the "default-input" property becomes unnecessary
> for chips that only have one suitable input (ADV7611 by design, and
> ADV7612 due to commit 7111cddd518f ("[media] media: adv7604: reduce
> support to first (digital) input").
>
> Additionally, Ian's documentation in commit bf9c82278c34 ("[media]
> media: adv7604: ability to read default input port from DT") states
> that the "default-input" property should reside directly in the node
> for adv7612. Hence, also adjust the parsing to make the implementation
> consistent with this.
>
> Signed-off-by: William Towle <william.to...@codethink.co.uk>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> ---
> drivers/media/i2c/adv7604.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 41a1bfc..d722c16 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -2788,7 +2788,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
> struct device_node *np;
> unsigned int flags;
> int ret;
> - u32 v;
> + u32 v = -1;
>
> np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
>
> @@ -2810,6 +2810,22 @@ static int adv76xx_parse_dt(struct adv76xx_state
> *state)
>
> of_node_put(endpoint);
>
> + if (of_property_read_u32(np, "default-input", &v)) {
> + /* not specified ... can we choose automatically? */
> + switch (state->info->type) {
> + case ADV7611:
> + v = 0;
> + break;
> + case ADV7612:
> + if (state->info->max_port == ADV76XX_PAD_HDMI_PORT_A)
> + v = 0;
> + /* else is unhobbled, leave unspecified */
Please add a break here, don't fall through.
What happens when the default_input is unspecified? I don't really like this,
I think that if nothing is specified, then it should just fall back to
input 0.
Note that neither include/media/i2c/adv7604.h nor
Documentation/devicetree/bindings/media/i2c/adv7604.txt
say anything about this either.
Regards,
Hans
> + default:
> + break;
> + }
> + }
> + state->pdata.default_input = v;
> +
> flags = bus_cfg.bus.parallel.flags;
>
> if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
>
