From: Ai Kyuse <ai.kyuse...@renesas.com>
An illegal sequence command error may occur if there is a stopbit or
cmd_index error as well as a CRC error. The correct course of action
is to re-enable IRQs
An illegal sequence data error may occur if there is a CRC or stopbit
error, or underrun. In this case set data->error correctly.
This is in preparation for enabling tuning support which relies on
differentiating between illegal sequence and other errors.
Signed-off-by: Ai Kyuse <ai.kyuse...@renesas.com>
[simon: broken out of a larger patch]
Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
---
v4
* Added Ack from Wolfram Sang
v3
* No change
v2
* Broken out of a larger patch (but forgot to post)
---
drivers/mmc/host/tmio_mmc_pio.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 192817850dff..806308ac93e7 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -520,7 +520,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
schedule_work(&host->done);
}
-static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
{
struct mmc_data *data;
spin_lock(&host->lock);
@@ -529,6 +529,9 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
if (!data)
goto out;
+ if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
+ stat & TMIO_STAT_TXUNDERRUN)
+ data->error = -EILSEQ;
if (host->chan_tx && (data->flags & MMC_DATA_WRITE) &&
!host->force_pio) {
u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
bool done = false;
@@ -577,8 +580,6 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
goto out;
}
- host->cmd = NULL;
-
/* This controller is sicker than the PXA one. Not only do we need to
* drop the top 8 bits of the first response word, we also need to
* modify the order of the response for short response command types.
@@ -598,14 +599,16 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
if (stat & TMIO_STAT_CMDTIMEOUT)
cmd->error = -ETIMEDOUT;
- else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+ else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) ||
+ stat & TMIO_STAT_STOPBIT_ERR ||
+ stat & TMIO_STAT_CMD_IDX_ERR)
cmd->error = -EILSEQ;
/* If there is data to handle we enable data IRQs here, and
* we will ultimatley finish the request in the data_end handler.
* If theres no data or we encountered an error, finish now.
*/
- if (host->data && !cmd->error) {
+ if (host->data && (!cmd->error || cmd->error == -EILSEQ)) {
if (host->data->flags & MMC_DATA_READ) {
if (host->force_pio || !host->chan_rx)
tmio_mmc_enable_mmc_irqs(host,
TMIO_MASK_READOP);
@@ -666,7 +669,7 @@ static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host
*host,
/* Data transfer completion */
if (ireg & TMIO_STAT_DATAEND) {
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
- tmio_mmc_data_irq(host);
+ tmio_mmc_data_irq(host, status);
return true;
}
--
2.7.0.rc3.207.g0ac5344
