Hi Geert,
thanks for review
On 07/12/2016 09:40, Geert Uytterhoeven wrote:
Hi Jacopo,
On Tue, Dec 6, 2016 at 5:34 PM, Jacopo Mondi <jac...@jmondi.org> wrote:
Add node to test MAX11100 ADC with LED28 connected to the chip input
line.
What does the name "LED28" refer to?
It's simply gpio #28 on port gpio5.
I have exported that as gpio-led, but it's totally equivalent to
exporting it from sysfs gpio interface.
Using gpio-led it's just there in as /sys/class/leds/LED28 without need
to export it everytime.
The ADC sits on a gpio-spi master.
Signed-off-by: Jacopo Mondi <jac...@jmondi.org>
---
Sending as RFC only, not for inclusion.
Used to test MAX11100 ADC driver currently connected to Koelsch GPIO
expander.
Adding LED28 as ADC input line.
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 5405d33..ac8f10d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -170,6 +170,27 @@
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
label = "LED8";
};
+ led28 {
+ gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ label = "LED28";
+ };
+ };
+
+ spi_gpio: spi-gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-sck = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
I would keep all gpios together.
+ status = "okay";
+
+ spi@0 {
adc@0
+ compatible = "maxim,max11100";
+ reg = <0>;
+ spi-max-frequency = <2500000>;
+ };
};
will change both in v2, thanks
j
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
