Hello. On 12/12/2016 07:09 PM, Niklas Söderlund wrote:
Add generic functionality to support Wake-on-Lan using MagicPacket which are supported by at least a few versions of sh_eth. Only add functionality for WoL, no specific sh_eth version are marked to support
Versions.
WoL yet. WoL is enabled in the suspend callback by setting MagicPacket detection and disabling all interrupts expect MagicPacket. In the resume path the driver needs to reset the hardware to rearm the WoL logic, this prevents the driver from simply restoring the registers and to take advantage of that sh_eth was not suspended to reduce resume time. To reset the hardware the driver close and reopens the device just like it would do
Closes.
in a normal suspend/resume scenario without WoL enabled, but it both close and open the device in the resume callback since the device needs
Closes and opens.
to be open for WoL to work.
One quirk needed for WoL is that the module clock needs to be prevented from being switched off by Runtime PM. To keep the clock alive the
I tried to find the code in question and failed, getting muddled in the RPM maze. Could you point at this code for my education? :-)
suspend callback need to call clk_enable() directly to increase the
My main concern is why we need to manipulate the clock directly -- can't you call RPM to achieve the same effect?
usage count of the clock. Then when Runtime PM decreases the clock usage count it won't reach 0 and be switched off.
You mean it does this even though we don't call pr_runtime_put_sync() as done in sh_eth_close()?
Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
[...] MBR, Sergei
