From: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>

The current code hard codes the call of hdmi_phy_configure() to be 8bpp
and provides extraneous error checking to verify that this hardcoded
value is correct. Simplify the implementation by removing the argument.

Signed-off-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
Reviewed-by: Jose Abreu <joab...@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index 107fea49c4c6..b4fb0bd78910 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -930,31 +930,14 @@ static void dw_hdmi_phy_sel_interface_control(struct 
dw_hdmi *hdmi, u8 enable)
                         HDMI_PHY_CONF0_SELDIPIF_MASK);
 }
 
-static int hdmi_phy_configure(struct dw_hdmi *hdmi,
-                             unsigned char res, int cscon)
+static int hdmi_phy_configure(struct dw_hdmi *hdmi, int cscon)
 {
-       unsigned res_idx;
        u8 val, msec;
        const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
        const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
        const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
        const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
 
-       switch (res) {
-       case 0: /* color resolution 0 is 8 bit colour depth */
-       case 8:
-               res_idx = DW_HDMI_RES_8;
-               break;
-       case 10:
-               res_idx = DW_HDMI_RES_10;
-               break;
-       case 12:
-               res_idx = DW_HDMI_RES_12;
-               break;
-       default:
-               return -EINVAL;
-       }
-
        /* PLL/MPLL Cfg - always match on final entry */
        for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
                if (hdmi->hdmi_data.video_mode.mpixelclock <=
@@ -1004,11 +987,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi,
                    HDMI_PHY_I2CM_SLAVE_ADDR);
        hdmi_phy_test_clear(hdmi, 0);
 
-       hdmi_phy_i2c_write(hdmi, mpll_config->res[res_idx].cpce, 0x06);
-       hdmi_phy_i2c_write(hdmi, mpll_config->res[res_idx].gmp, 0x15);
+       hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce, 0x06);
+       hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp, 0x15);
 
        /* CURRCTRL */
-       hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[res_idx], 0x10);
+       hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0], 0x10);
 
        hdmi_phy_i2c_write(hdmi, 0x0000, 0x13);  /* PLLPHBYCTRL */
        hdmi_phy_i2c_write(hdmi, 0x0006, 0x17);
@@ -1068,7 +1051,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
                dw_hdmi_phy_enable_powerdown(hdmi, true);
 
                /* Enable CSC */
-               ret = hdmi_phy_configure(hdmi, 8, cscon);
+               ret = hdmi_phy_configure(hdmi, cscon);
                if (ret)
                        return ret;
        }
-- 
Regards,

Laurent Pinchart

Reply via email to