This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state()
Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com> Acked-by: Felipe Balbi <felipe.ba...@linux.intel.com> --- drivers/usb/phy/phy-qcom-8x16-usb.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c index d8593adb3621..fdf686398772 100644 --- a/drivers/usb/phy/phy-qcom-8x16-usb.c +++ b/drivers/usb/phy/phy-qcom-8x16-usb.c @@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy) val = ULPI_PWR_OTG_COMP_DISABLE; usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); - state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB); + state = extcon_get_state(qphy->vbus_edev, EXTCON_USB); if (state) phy_8x16_vbus_on(qphy); else @@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev) goto off_clks; qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; - ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); + ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev, + EXTCON_USB, &qphy->vbus_notify); if (ret < 0) goto off_power; ret = usb_add_phy_dev(&qphy->phy); if (ret) - goto off_extcon; + goto off_power; qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; register_reboot_notifier(&qphy->reboot_notify); return 0; -off_extcon: - extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); off_power: regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); off_clks: @@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev) struct phy_8x16 *qphy = platform_get_drvdata(pdev); unregister_reboot_notifier(&qphy->reboot_notify); - extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); /* * Ensure that D+/D- lines are routed to uB connector, so -- 1.9.1