HI Sergei, Thanks will update for v2.
On 2017-03-07 12:49:25 +0300, Sergei Shtylyov wrote: > On 3/6/2017 11:03 PM, Niklas Söderlund wrote: > > > The .thermal_init needs to be delayed a short amount of to allow for the > > Amount of what? :-) > > > TEMP register to contain something useful. If it's not delayed theses > > These. > > > warnings are common during boot: > > > > thermal thermal_zone0: failed to read out thermal zone (-5) > > thermal thermal_zone1: failed to read out thermal zone (-5) > > thermal thermal_zone2: failed to read out thermal zone (-5) > > > > The warnings are triggered by the first call to .get_temp while the TEMP > > register contains 0 and rcar_gen3_thermal_get_temp() returns -EIO since > > a TEMP value of 0 will result in a temperature reading which is out of > > specifications. > > > > This should have been done in the initial commit which adds the driver > > as the same issue was found and corrected for r8a7795. > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se> > [...] > > MBR, Sergei > -- Regards, Niklas Söderlund
