Use rvin_reset_format() in rvin_s_dv_timings() instead of just resetting a few fields. This fixes an issue where the field format was not properly set after S_DV_TIMINGS.
Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se> --- drivers/media/platform/rcar-vin/rcar-v4l2.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c index 69bc4cfea6a8aeb5..7ca27599b9982ffc 100644 --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c @@ -573,12 +573,8 @@ static int rvin_s_dv_timings(struct file *file, void *priv_fh, if (ret) return ret; - vin->source.width = timings->bt.width; - vin->source.height = timings->bt.height; - vin->format.width = timings->bt.width; - vin->format.height = timings->bt.height; - - return 0; + /* Changing the timings will change the width/height */ + return rvin_reset_format(vin); } static int rvin_g_dv_timings(struct file *file, void *priv_fh, -- 2.12.0