Hi! Here's the revised series enabling PWMs on r8a7795 and r8a7796 Salvator-X boards.
This revision addresses the issues found by Geert and adds Laurent's backlight support patch, including a version for r8a7796. CU Uli Changes since v1: - PWM clock is S0D12, not S3D4 - dts: fix register lengths, add resets - only enable one set of pins for each PWM - add backlight support Laurent Pinchart (1): arm64: dts: r8a7795: salvator-x: Add panel backlight support Ryo Kodama (2): clk: renesas: r8a7796: add PWM clock arm64: dts: r8a7796-salvator-x: Add PWM device support Takeshi Kihara (3): pinctrl: sh-pfc: r8a7796: Add PWM pins, groups and functions arm64: dts: r8a7796: Add PWM device nodes arm64: dts: r8a7795-salvator-x: Enable PWM2 Ulrich Hecht (2): arm64: dts: r8a7796: salvator-x: Add panel backlight support dt-bindings: pwm: Add R-Car M3-W device tree bindings .../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 1 + arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 34 +++++ arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 35 +++++ arch/arm64/boot/dts/renesas/r8a7796.dtsi | 70 ++++++++++ drivers/clk/renesas/r8a7796-cpg-mssr.c | 1 + drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 153 +++++++++++++++++++++ 6 files changed, 294 insertions(+) -- 2.7.4
