The existing code gives an incorrect pointer value.
The buffer pointer 'buf' was of type unsigned short *, and 'count' was a
number in bytes. A cast of buf should have been used.
However,instead of casting, just change the code to use u32 pointers.
Reported-by: Dan Carpenter <dan.carpen...@oracle.com>
Fixes: 8185e51f358a: ("mmc: tmio-mmc: add support for 32bit data port")
Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
---
v2:
* Use u32 pointers instead of casting
---
drivers/mmc/host/tmio_mmc_core.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 77e7b56a9099..e4e35b6e2db5 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -415,30 +415,31 @@ static void tmio_mmc_transfer_data(struct tmio_mmc_host
*host,
* Transfer the data
*/
if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
- u8 data[4] = { };
+ u32 data = 0;
+ u32 *buf32 = (u32 *)buf;
if (is_read)
- sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32,
count >> 2);
else
- sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32,
count >> 2);
/* if count was multiple of 4 */
if (!(count & 0x3))
return;
- buf8 = (u8 *)(buf + (count >> 2));
+ buf32 += count >> 2;
count %= 4;
if (is_read) {
sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT,
- (u32 *)data, 1);
- memcpy(buf8, data, count);
+ &data, 1);
+ memcpy(buf32, &data, count);
} else {
- memcpy(data, buf8, count);
+ memcpy(&data, buf32, count);
sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT,
- (u32 *)data, 1);
+ &data, 1);
}
return;
--
2.13.0
