Re: Status of r8a7795 SDHI support?

[Dirk Behme]

On 17.08.2017 09:29, Wolfram Sang wrote:

What's the status of SDHI support in mainline and/or renesas-drivers
(renesas-drivers-2017-08-16-v4.13-rc5)?

I use it daily here, even with SDR104 enabled.


On ES2.0? I wonder how if not even the pinmux is there ;)


sdhci-pltfm: SDHCI platform and OF driver helper

Wrong driver? We have SDHI not SDHCI.


Changing the config a little I have

--cut --
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SDHI_SYS_DMAC=y
CONFIG_MMC_SDHI_INTERNAL_DMAC=y
-- cut --

now.

As SDHCI is disabled, now, I don't get anything SD/MMC related in the 
boot log any more. Not even an error message. Hmm ...

The device tree has [1].

Best regards

Dirk

[1]

&sdhi0 {
        pinctrl-0 = <&sdhi0_pins>;
        pinctrl-1 = <&sdhi0_pins_uhs>;
        pinctrl-names = "default";

        vmmc-supply = <&reg_3p3v>;
        non-removable; /* Workaround due to CD on CPLD */
        bus-width = <4>;
        no-1-8-v;
        status = "okay";
};

&sdhi3 {
        /* used for on-board 8bit eMMC */
        pinctrl-0 = <&sdhi3_pins>;
        pinctrl-1 = <&sdhi3_pins_uhs>;
        pinctrl-names = "default", "state_uhs";

        vmmc-supply = <&reg_3p3v>;
        vqmmc-supply = <&reg_1p8v>;
        mmc-hs400-1_8v;
        bus-width = <8>;
        non-removable;
        status = "okay";
};