[PATCH 16/18] arm64: dts: ulcb-kf: enable PCA9548 on I2C2

[Vladimir Barinov]

This supports PCA9548 I2C switch on I2C2 bus on ULCB Kingfisher board

Signed-off-by: Vladimir Barinov <vladimir.bari...@cogentembedded.com>
---
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi 
b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 1cf8466..3bbc490 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -68,6 +68,14 @@
                interrupt-parent = <&gpio6>;
                interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
        };
+
+       i2cswitch2: pca9548@71 {
+               compatible = "nxp,pca9548";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+               reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+       };
 };
 
 &i2c4 {
-- 
1.9.1