Hello!
On 9/7/2017 1:36 AM, Vladimir Barinov wrote:
This supports CAN0/1 on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov <[email protected]>
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 2449915..ca8de1a 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -16,6 +16,22 @@
};
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ renesas,can-clock-select = <0x0>;
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ renesas,can-clock-select = <0x0>;
IIRC, you can omit these Renesas specific props -- the driver uses 0 if it
doesn't find the prop.
[...]
MBR, Sergei
