On Wed, Sep 13, 2017 at 12:59:07PM +0200, Niklas Söderlund wrote: > Hi, > > This series adds support for for using CPUFreq as a cooling device for > the A57 CUP:s on Renesas H3 and M3-W SoC:s. It depends on Simon Horman's > topic/rcar-gen3-cpufreq branch [1] and is tested on-top the latest > renesas-drivers on H3 and M3-W. For test results and test procedure > please see: > > http://elinux.org/R-Car/Tests:rcar_gen3_thermal
My cpufreq work needs revising to address review from both Geert and yourself. I will try to address this in the near future. In the mean time I have marked this series as Deferred. > Few notes on the specific values used in this series and why they might > need to be changed. > > - The trip point temperature of 95000 used is the most conservative one > from the BSP and maybe should be set at 110000 which is the most > aggressive one in the BSP. > > - The cooling states described in all cooling-maps nodes might be > subject to change depending on the out-come of the ongoing review > process of Simon's work. It should use the highest possible cooling > state so if the number of states change due review of his work this > should be reflected in this series. > > 1. https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git > > Niklas Söderlund (2): > arm64: dts: r8a7795: add thermal cooling management > arm64: dts: r8a7796: add thermal cooling management > > arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 > ++++++++++++++++++++++++++++++++ > arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++ > 2 files changed, 78 insertions(+) > > -- > 2.14.1 >
