Hi Uli,
On Wed, Nov 15, 2017 at 4:25 PM, Ulrich Hecht
<ulrich.hecht+rene...@gmail.com> wrote:
> The single SDHI controller is connected to eMMC.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> @@ -32,6 +32,24 @@
> /* first 128MB is reserved for secure area. */
> reg = <0x0 0x48000000 0x0 0x18000000>;
> };
> +
> + reg_1p8v: regulator0 {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + reg_3p3v: regulator1 {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
As the eMMC is 1.8V only, I'll defer the review to the people looking
into the need
to specify the 3.3V pinctrl on other R-Car Gen3 boards.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
