From: Geert Uytterhoeven <[email protected]> Add a device node for the ROHM BD9571MWV PMIC.
This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 29 ++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 24a32c63ce7c..b9505a65a793 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -355,6 +355,30 @@ &i2c_dvfs { status = "okay"; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ohci0 { @@ -410,6 +434,11 @@ function = "i2c2"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; -- 2.11.0
