From: Geert Uytterhoeven <geert+rene...@glider.be>

Since commit 705bc96c2c15313c ("irqchip: renesas-intc-irqpin: Add minimal
runtime PM support"), when an IRQ is used for wakeup, the INTC block's
module clock (if exists) is manually kept running during system suspend, to
make sure the device stays active.

However, this explicit clock handling is merely a workaround for a failure
to properly communicate wakeup information to the PM core. Instead, set the
WAKEUP_PATH driver PM flag to indicate that the device is part of the
wakeup path, which further also enables middle-layers and PM domains (like
genpd) to act on this.

In case the device is attached to genpd and depending on if it has an
active wakeup configuration, genpd will keep the device active (the clock
running) during system suspend when needed. This enables us to remove all
explicit clock handling code from the driver, so let's do that as well.

Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
[Ulf: Converted to use the WAKEUP_PATH driver PM flag]
Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
---
 drivers/irqchip/irq-renesas-intc-irqpin.c | 42 +++++++++++--------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c 
b/drivers/irqchip/irq-renesas-intc-irqpin.c
index 06f29cf..bfc2c5c 100644
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
@@ -17,7 +17,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -78,16 +77,14 @@ struct intc_irqpin_priv {
        struct platform_device *pdev;
        struct irq_chip irq_chip;
        struct irq_domain *irq_domain;
-       struct clk *clk;
        unsigned shared_irqs:1;
-       unsigned needs_clk:1;
+       unsigned wakeup_path:1;
        u8 shared_irq_mask;
 };
 
 struct intc_irqpin_config {
        unsigned int irlm_bit;
        unsigned needs_irlm:1;
-       unsigned needs_clk:1;
 };
 
 static unsigned long intc_irqpin_read32(void __iomem *iomem)
@@ -287,15 +284,7 @@ static int intc_irqpin_irq_set_wake(struct irq_data *d, 
unsigned int on)
        int hw_irq = irqd_to_hwirq(d);
 
        irq_set_irq_wake(p->irq[hw_irq].requested_irq, on);
-
-       if (!p->clk)
-               return 0;
-
-       if (on)
-               clk_enable(p->clk);
-       else
-               clk_disable(p->clk);
-
+       p->wakeup_path = on;
        return 0;
 }
 
@@ -365,12 +354,10 @@ static const struct irq_domain_ops 
intc_irqpin_irq_domain_ops = {
 static const struct intc_irqpin_config intc_irqpin_irlm_r8a777x = {
        .irlm_bit = 23, /* ICR0.IRLM0 */
        .needs_irlm = 1,
-       .needs_clk = 0,
 };
 
 static const struct intc_irqpin_config intc_irqpin_rmobile = {
        .needs_irlm = 0,
-       .needs_clk = 1,
 };
 
 static const struct of_device_id intc_irqpin_dt_ids[] = {
@@ -422,18 +409,6 @@ static int intc_irqpin_probe(struct platform_device *pdev)
        platform_set_drvdata(pdev, p);
 
        config = of_device_get_match_data(dev);
-       if (config)
-               p->needs_clk = config->needs_clk;
-
-       p->clk = devm_clk_get(dev, NULL);
-       if (IS_ERR(p->clk)) {
-               if (p->needs_clk) {
-                       dev_err(dev, "unable to get clock\n");
-                       ret = PTR_ERR(p->clk);
-                       goto err0;
-               }
-               p->clk = NULL;
-       }
 
        pm_runtime_enable(dev);
        pm_runtime_get_sync(dev);
@@ -602,12 +577,25 @@ static int intc_irqpin_remove(struct platform_device 
*pdev)
        return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int intc_irqpin_suspend(struct device *dev)
+{
+       struct intc_irqpin_priv *p = dev_get_drvdata(dev);
+
+       dev_pm_set_driver_flags(dev, p->wakeup_path ? DPM_FLAG_WAKEUP_PATH : 0);
+       return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(intc_irqpin_pm_ops, intc_irqpin_suspend, NULL);
+
 static struct platform_driver intc_irqpin_device_driver = {
        .probe          = intc_irqpin_probe,
        .remove         = intc_irqpin_remove,
        .driver         = {
                .name   = "renesas_intc_irqpin",
                .of_match_table = intc_irqpin_dt_ids,
+               .pm     = &intc_irqpin_pm_ops,
        }
 };
 
-- 
2.7.4

Reply via email to