Hi! This adds I2C controllers to the D3 device tree and enables I2C busses 0 and 1 on the Draak board. (I2C2 is not connected on that board.)
This revision addresses Geert's review comments and adds Reviewed-Bys. See below for details. CU Uli Changes since v1: - pinctrl: patch dropped, has been picked up - i2c-rcar: patch dropped, redundant - dtsi: added dmac2 for i2c0-2 - dtsi: fixed internal SCL delays - dts: fixed EEPROM compatible string - bindings: added Rohm EEPROM - bindings: fixed typo in i2c-rcar bindings Ulrich Hecht (5): arm64: renesas: r8a77995: add I2C support arm64: renesas: draak: enable I2C controller 0 and EEPROM arm64: renesas: draak: enable I2C controller 1 i2c: rcar: document R8A77995 bindings dt-bindings: at24: add bindings for Rohm BR24T01 Documentation/devicetree/bindings/eeprom/at24.txt | 2 + Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 + arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 28 +++++++++ arch/arm64/boot/dts/renesas/r8a77995.dtsi | 67 ++++++++++++++++++++++ 4 files changed, 98 insertions(+) -- 2.7.4
