Hello!
On 1/30/2018 12:58 PM, Jacopo Mondi wrote:
Add Capture Engine Unit (CEU) node to device tree.
Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
---
arch/arm/boot/dts/r7s72100.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ab9645a..5fe62f9 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
[...]
@@ -667,4 +667,13 @@
power-domains = <&cpg_clocks>;
status = "disabled";
};
+
+ ceu: ceu@e8210000 {
The DT spec dictates the generic node names should be used. For the R-Car
VIN we use "video@...", hence I suggest that use the same here.
+ reg = <0xe8210000 0x3000>;
+ compatible = "renesas,r7s72100-ceu";
+ interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
MBR, Sergei
